F5F Stay Refreshed Hardware Desktop This Windows 11 version requires one active processor core to start.

This Windows 11 version requires one active processor core to start.

This Windows 11 version requires one active processor core to start.

J
JokerFame
Senior Member
670
11-27-2021, 04:42 PM
#1
We completed the PC build with the specified components. The problem is it won’t boot Windows unless both P and E cores are set to active count one. We’ve updated the BIOS, refreshed drivers, and enabled TPM 2.0, but no fix has been found yet.
J
JokerFame
11-27-2021, 04:42 PM #1

We completed the PC build with the specified components. The problem is it won’t boot Windows unless both P and E cores are set to active count one. We’ve updated the BIOS, refreshed drivers, and enabled TPM 2.0, but no fix has been found yet.

K
ketman34
Posting Freak
834
11-27-2021, 06:00 PM
#2
I clarify that when you say "will not boot," it means the system fails to power on or initialize properly. Specifically, the hardware or firmware prevents any startup sequence from completing. If XMP is disabled, it likely affects display calibration but won’t stop the boot entirely—just may cause visual issues. Testing with a Linux USB stick can help determine if the issue lies in the OS or the storage device itself.
K
ketman34
11-27-2021, 06:00 PM #2

I clarify that when you say "will not boot," it means the system fails to power on or initialize properly. Specifically, the hardware or firmware prevents any startup sequence from completing. If XMP is disabled, it likely affects display calibration but won’t stop the boot entirely—just may cause visual issues. Testing with a Linux USB stick can help determine if the issue lies in the OS or the storage device itself.

D
Dementor100
Junior Member
18
11-28-2021, 08:32 PM
#3
I meant to say it won’t start into Windows right away after passing the BIOS, but it freezes when it tries to boot. We’ve tested all cores without XMP enabled and it still doesn’t work. Installing from the official Windows USB caused problems—we removed the NVMe drive, formatted it, then installed on another PC. It seems the issue isn’t with the OS version (Windows 11 22h2) we’re using.
D
Dementor100
11-28-2021, 08:32 PM #3

I meant to say it won’t start into Windows right away after passing the BIOS, but it freezes when it tries to boot. We’ve tested all cores without XMP enabled and it still doesn’t work. Installing from the official Windows USB caused problems—we removed the NVMe drive, formatted it, then installed on another PC. It seems the issue isn’t with the OS version (Windows 11 22h2) we’re using.

K
Klyner
Member
184
11-29-2021, 01:15 AM
#4
I would create a memtest86 USB drive to check for RAM issues. If it runs through several error-free passes, I’d proceed with a Linux USB drive to test boot functionality.
K
Klyner
11-29-2021, 01:15 AM #4

I would create a memtest86 USB drive to check for RAM issues. If it runs through several error-free passes, I’d proceed with a Linux USB drive to test boot functionality.

R
reddwarf1234
Member
219
12-02-2021, 01:51 AM
#5
Great, please let me know what you'd like to do next!
R
reddwarf1234
12-02-2021, 01:51 AM #5

Great, please let me know what you'd like to do next!

I
ianislebg17
Junior Member
28
12-02-2021, 09:54 AM
#6
Begin with the basics—remove the mainboard GPU, PSU, and cooler. Place the mainboard in the antistatic bag, attach the cooler, and attempt to boot without the GPU inside the case. Why wasn’t it installed directly on the system? Restart the BIOS to factory settings and try booting again. If needed, reinstall the device. Drivers may differ depending on the system; for AMD systems, booting on a new Intel platform can be challenging due to missing AHCI drivers at startup. Since the original system wasn’t specified, it’s based on assumptions.
I
ianislebg17
12-02-2021, 09:54 AM #6

Begin with the basics—remove the mainboard GPU, PSU, and cooler. Place the mainboard in the antistatic bag, attach the cooler, and attempt to boot without the GPU inside the case. Why wasn’t it installed directly on the system? Restart the BIOS to factory settings and try booting again. If needed, reinstall the device. Drivers may differ depending on the system; for AMD systems, booting on a new Intel platform can be challenging due to missing AHCI drivers at startup. Since the original system wasn’t specified, it’s based on assumptions.

1
10ukkie10
Member
180
12-02-2021, 04:52 PM
#7
The responses explain the reason behind the OS installation on a different system. We encountered issues with the Windows USB installation, removed the NVMe drive, formatted it, and then installed Windows on my existing system. My hardware includes a 12900k, 3090 Ti, and a 13900K CPU without built-in graphics. The BIOS was updated, and since I’m using one core, Windows boots successfully only when that core is active. I plan to take the PC to the place where the parts were bought to see if further troubleshooting is possible. I’ve only assembled a few PCs before, but this hasn’t been a problem for me.
1
10ukkie10
12-02-2021, 04:52 PM #7

The responses explain the reason behind the OS installation on a different system. We encountered issues with the Windows USB installation, removed the NVMe drive, formatted it, and then installed Windows on my existing system. My hardware includes a 12900k, 3090 Ti, and a 13900K CPU without built-in graphics. The BIOS was updated, and since I’m using one core, Windows boots successfully only when that core is active. I plan to take the PC to the place where the parts were bought to see if further troubleshooting is possible. I’ve only assembled a few PCs before, but this hasn’t been a problem for me.

E
eggman722
Member
176
12-09-2021, 12:27 PM
#8
I would have taken a similar approach because it's brand new. However, it seems like the CPU might be damaged. The vendor could test each part thoroughly to identify the faulty component at least.
E
eggman722
12-09-2021, 12:27 PM #8

I would have taken a similar approach because it's brand new. However, it seems like the CPU might be damaged. The vendor could test each part thoroughly to identify the faulty component at least.

N
NooLele
Posting Freak
847
12-09-2021, 04:58 PM
#9
Looking into a possible faulty CPU issue seems likely, maybe it'll be fixed soon.
N
NooLele
12-09-2021, 04:58 PM #9

Looking into a possible faulty CPU issue seems likely, maybe it'll be fixed soon.

I
IvyTheCat
Member
208
12-19-2021, 05:38 PM
#10
What happened?
I
IvyTheCat
12-19-2021, 05:38 PM #10

What happened?