F5F Stay Refreshed Hardware Desktop This warning indicates the beginning of a problem you're encountering.

This warning indicates the beginning of a problem you're encountering.

This warning indicates the beginning of a problem you're encountering.

Pages (2): 1 2 Next
C
CreepyMatt9
Junior Member
4
10-26-2021, 03:05 PM
#1
It seems you're experiencing the same issue repeatedly after rebooting or shutting down your PC. I checked the forum for similar problems, but no matches were found. Your system details look specific: Windows 11, 64-bit MSI b550 tomahawk Ryzen 9 3900X, 32 GB DDR4 Trident Z Neo, 3800 MHz CL16, EVGA G5, 850W gold PSU, and a 2 TB Corsair MVNE GEN4 drive. You replaced the RAM from the original build and upgraded to Trident Neo because XMP wasn't supported with the old RAM. If anyone has encountered this error, it would be helpful to know more about it. Please let me know if you need further assistance.
C
CreepyMatt9
10-26-2021, 03:05 PM #1

It seems you're experiencing the same issue repeatedly after rebooting or shutting down your PC. I checked the forum for similar problems, but no matches were found. Your system details look specific: Windows 11, 64-bit MSI b550 tomahawk Ryzen 9 3900X, 32 GB DDR4 Trident Z Neo, 3800 MHz CL16, EVGA G5, 850W gold PSU, and a 2 TB Corsair MVNE GEN4 drive. You replaced the RAM from the original build and upgraded to Trident Neo because XMP wasn't supported with the old RAM. If anyone has encountered this error, it would be helpful to know more about it. Please let me know if you need further assistance.

E
electrodude44
Member
143
10-26-2021, 09:02 PM
#2
Do you have the Razor Axon Player program set up? If yes, I would remove it and check if that resolves the problem.
E
electrodude44
10-26-2021, 09:02 PM #2

Do you have the Razor Axon Player program set up? If yes, I would remove it and check if that resolves the problem.

G
GekkeGans
Member
201
10-27-2021, 12:31 AM
#3
Having XMP enabled doesn't guarantee stability. Are you certain your 3800Mhz XMP is reliable, or is it the AMD fabric linked to RAM that's causing issues? At 1900Mhz, the fabric runs at half the RAM speed and may be unstable. I recall seeing this error during memory overclocking—still not stable, but it could be the fabric clocks themselves that are affected by RAM speed.
G
GekkeGans
10-27-2021, 12:31 AM #3

Having XMP enabled doesn't guarantee stability. Are you certain your 3800Mhz XMP is reliable, or is it the AMD fabric linked to RAM that's causing issues? At 1900Mhz, the fabric runs at half the RAM speed and may be unstable. I recall seeing this error during memory overclocking—still not stable, but it could be the fabric clocks themselves that are affected by RAM speed.

D
DarkerDragon
Member
55
10-27-2021, 06:53 AM
#4
Check the software itself (remove it if needed) or your RAM/bios. Please let me know how many RAM sticks you have.
D
DarkerDragon
10-27-2021, 06:53 AM #4

Check the software itself (remove it if needed) or your RAM/bios. Please let me know how many RAM sticks you have.

S
SodumYT
Member
59
10-27-2021, 07:49 AM
#5
Turn off XMP and run the CPU at normal speeds to check if the message appears. Consider removing the program if you have it installed, as an outdated version or memory problems might be the cause. You can reinstall it or try a newer or older version if needed.
S
SodumYT
10-27-2021, 07:49 AM #5

Turn off XMP and run the CPU at normal speeds to check if the message appears. Consider removing the program if you have it installed, as an outdated version or memory problems might be the cause. You can reinstall it or try a newer or older version if needed.

B
BJcontrollers
Junior Member
5
10-28-2021, 03:52 AM
#6
I replaced both 632 gigabit RAM units, as the previous setup would crash under XMP. The fix worked only with this specific error and sometimes affected other programs too.
B
BJcontrollers
10-28-2021, 03:52 AM #6

I replaced both 632 gigabit RAM units, as the previous setup would crash under XMP. The fix worked only with this specific error and sometimes affected other programs too.

R
Rik3107
Member
59
10-29-2021, 08:27 AM
#7
Sure, I’m planning to give it a shot now. My previous RAM setup was pretty budget-friendly but had terrible timing issues that caused crashes. This upgrade has worked perfectly so far. Except for this warning. Could it be related to my motherboard or maybe my CPU, since I’ve had similar problems with both types of RAM?
R
Rik3107
10-29-2021, 08:27 AM #7

Sure, I’m planning to give it a shot now. My previous RAM setup was pretty budget-friendly but had terrible timing issues that caused crashes. This upgrade has worked perfectly so far. Except for this warning. Could it be related to my motherboard or maybe my CPU, since I’ve had similar problems with both types of RAM?

T
Tetera88
Junior Member
14
10-30-2021, 01:34 PM
#8
Have you encountered problems with both configurations when using stock speeds, or only when XMP is activated?
T
Tetera88
10-30-2021, 01:34 PM #8

Have you encountered problems with both configurations when using stock speeds, or only when XMP is activated?

Y
yoman225
Member
71
10-30-2021, 03:00 PM
#9
The initial configuration had only one XMP active for this setup. I haven’t disabled it yet; I activated it from the start without issues. Recently, an error appeared, but everything else functions normally. I’m concerned this might signal a more serious issue.
Y
yoman225
10-30-2021, 03:00 PM #9

The initial configuration had only one XMP active for this setup. I haven’t disabled it yet; I activated it from the start without issues. Recently, an error appeared, but everything else functions normally. I’m concerned this might signal a more serious issue.

N
N4M3s_ST3V3
Member
63
10-31-2021, 04:29 AM
#10
With time your memory controller may lose stability, especially when using XMP or overclocking components—that’s not unusual. If your games and other stress tests are performing well, you can attempt the built-in memory test found here. http://hs.windows.microsoft.com/hhweb/co...d49fb9872/ This test may take a long time to complete, and I’m unsure of its accuracy, but if it worked for me, I’d remove the Razor software first beforehand.
N
N4M3s_ST3V3
10-31-2021, 04:29 AM #10

With time your memory controller may lose stability, especially when using XMP or overclocking components—that’s not unusual. If your games and other stress tests are performing well, you can attempt the built-in memory test found here. http://hs.windows.microsoft.com/hhweb/co...d49fb9872/ This test may take a long time to complete, and I’m unsure of its accuracy, but if it worked for me, I’d remove the Razor software first beforehand.

Pages (2): 1 2 Next