This update won't be published yet.
This update won't be published yet.
Hello! I recently assembled my new PC and am facing issues with posting again. Here are the components: TR 2950X, ZENITH EXTREME ALPHA MOBO, 2x 8GB Corsair RGB RAM CMR16GX4M2D3000C16, RI650W CORSAIR PSU, and a 500GB SAMSUNG EVO SSD. Initially, everything functioned properly, but now it won't boot. The LEDs on the Mobo change color indicating RAM, CPU, and then failure to start. After writing the CPU code, it consistently shows 00, then only 00. Once I rebooted, it became stable enough for Memtestx86 to crash. I've checked the CPU pins, swapped PSUs, tried different RAM channels, and even flashed the BIOS. Please help—I've done everything possible. Thanks!
Thanks for the suggestion! That attempt was unsuccessful, unfortunately.
It seems to function well and matches the latest BIOS updates. Try reinserting the CPU and confirming the DDR4 connection is secure—this often resolves TR4-related problems. Also, verify that the CPU power cable is connected properly; using just one 8-pin connector should suffice.
I've tried everything possible! I used an 8-pin connector before switching to a different one, and now everything is properly connected and secured. The DRAM LED remains active, which suggests the RAM might not be compatible with your setup.
The setup is accurate according to the instructions. I've tested various configurations, but the problem persists.