F5F Stay Refreshed Hardware Desktop This setup works well and doesn't require overclocking.

This setup works well and doesn't require overclocking.

This setup works well and doesn't require overclocking.

E
eduardodd08
Posting Freak
Find
852
10-23-2017, 08:56 AM
#1
The system runs smoothly at 3.6GHz, yet HWInfo shows it’s ramping up to 4042MHz across all cores. It seems the boost is working but not sustaining for extended periods. Restarts don’t fully reset the Ryzen Master settings. I turned off OC in Ryzen Master and adjusted overclocking on the B350 motherboard BIOS—now it hits 4GHz at 1.35V. I’m curious if 4GHz is normal or unusually high. After downgrading from 8C/16T to 6C/12T, it still feels stable enough. Lower voltages might actually improve stability. Your goal of a strong overclock and enjoying the new hardware is clear.
Reply
Reply
E
eduardodd08
10-23-2017, 08:56 AM #1

The system runs smoothly at 3.6GHz, yet HWInfo shows it’s ramping up to 4042MHz across all cores. It seems the boost is working but not sustaining for extended periods. Restarts don’t fully reset the Ryzen Master settings. I turned off OC in Ryzen Master and adjusted overclocking on the B350 motherboard BIOS—now it hits 4GHz at 1.35V. I’m curious if 4GHz is normal or unusually high. After downgrading from 8C/16T to 6C/12T, it still feels stable enough. Lower voltages might actually improve stability. Your goal of a strong overclock and enjoying the new hardware is clear.

Reply
Reply
J
Jaydel
Junior Member
Find
2
10-23-2017, 09:31 AM
#2
My 3600 handles 4.0 all cores at 1.025v, whereas my 3900x achieves 3.6 to 3.8 at 1.1v.
Reply
Reply
J
Jaydel
10-23-2017, 09:31 AM #2

My 3600 handles 4.0 all cores at 1.025v, whereas my 3900x achieves 3.6 to 3.8 at 1.1v.

Reply
Reply
M
mishy07
Senior Member
Find
371
10-23-2017, 10:53 AM
#3
Really shocking, thinking newer generations wouldn’t go that far... I’ll need to work on reducing it. Thanks for the support!
Reply
Reply
M
mishy07
10-23-2017, 10:53 AM #3

Really shocking, thinking newer generations wouldn’t go that far... I’ll need to work on reducing it. Thanks for the support!

Reply
Reply
Z
ZakenMannetje
Junior Member
Find
46
10-23-2017, 08:16 PM
#4
Adjust the speed to 1.2x and observe the results. It seems lower voltages might improve idle performance.
Reply
Reply
Z
ZakenMannetje
10-23-2017, 08:16 PM #4

Adjust the speed to 1.2x and observe the results. It seems lower voltages might improve idle performance.

Reply
Reply