This new MOBO isn't working on your Z390 Aorus Xtreme Waterforce.

F5F Stay Refreshed Hardware Desktop This new MOBO isn't working on your Z390 Aorus Xtreme Waterforce.

This new MOBO isn't working on your Z390 Aorus Xtreme Waterforce.

This new MOBO isn't working on your Z390 Aorus Xtreme Waterforce.

O

Ozwego
Member

191

03-31-2018, 12:43 PM

#1

Hi everyone, I recently assembled a new watercooled setup using: MOBO Gigabyte Z390 Aorus Xtreme Waterforce, Intel i9-9900K, Gigabyte AORUS GeForce RTX 2080Ti Xtreme Waterforce, Corsair Vengeance RGB PRO 64GB 3200Mhz, Seasonic Prime Ultra 850 Titanium PSU, HD 1T Samsung M.2 SSD 970 EVO PLUS. I tested the EZWB water system and fans with a direct PSU connection and everything worked perfectly. Now, when I connect the PSU to the MOBO, the red power button on the board lights up red but it doesn’t power on—neither with the case power button nor the MOBO power button. I’ve double-checked all connections (24 pin + 12 pin power, case cables, video, memory, etc.) and everything seems fine. Could you help identify the issue? Thanks in advance, Jaime.

O

Ozwego

03-31-2018, 12:43 PM #1

Hi everyone, I recently assembled a new watercooled setup using: MOBO Gigabyte Z390 Aorus Xtreme Waterforce, Intel i9-9900K, Gigabyte AORUS GeForce RTX 2080Ti Xtreme Waterforce, Corsair Vengeance RGB PRO 64GB 3200Mhz, Seasonic Prime Ultra 850 Titanium PSU, HD 1T Samsung M.2 SSD 970 EVO PLUS. I tested the EZWB water system and fans with a direct PSU connection and everything worked perfectly. Now, when I connect the PSU to the MOBO, the red power button on the board lights up red but it doesn’t power on—neither with the case power button nor the MOBO power button. I’ve double-checked all connections (24 pin + 12 pin power, case cables, video, memory, etc.) and everything seems fine. Could you help identify the issue? Thanks in advance, Jaime.

R

RoTa_Mags
Member

94

04-03-2018, 03:03 AM

#2

I pressed the power button.

R

RoTa_Mags

04-03-2018, 03:03 AM #2

I pressed the power button.

D

dmko
Member

125

04-09-2018, 01:01 PM

#3

Both power switches are located on the motherboard, illuminating red and the case power switch as well. Neither responds when pressed.

D

dmko

04-09-2018, 01:01 PM #3

Both power switches are located on the motherboard, illuminating red and the case power switch as well. Neither responds when pressed.

A

alex909090
Junior Member

18

04-11-2018, 05:30 AM

#4

Check the LEDs in the lower right corner of the motherboard. See if any of them illuminate during the startup process.

A

alex909090

04-11-2018, 05:30 AM #4

Check the LEDs in the lower right corner of the motherboard. See if any of them illuminate during the startup process.

G

GriefMeAndDie
Junior Member

2

04-22-2018, 10:32 AM

#5

I'll check it later, but from what I see, only the red power button is active.

G

GriefMeAndDie

04-22-2018, 10:32 AM #5

I'll check it later, but from what I see, only the red power button is active.

Z

Zsniper1274
Member

169

04-22-2018, 04:27 PM

#6

Use a screwdriver to activate the device.

Z

Zsniper1274

04-22-2018, 04:27 PM #6

Use a screwdriver to activate the device.

D

DalekSec
Junior Member

3

04-23-2018, 12:23 AM

#7

Hello! Yes, I've resolved the problem.

D

DalekSec

04-23-2018, 12:23 AM #7

Hello! Yes, I've resolved the problem.

T

TOMASpires
Member

65

04-24-2018, 07:27 PM

#8

You're facing the same challenge again? I'm here to help you find a solution. Could you share more details about the problem?

T

TOMASpires

04-24-2018, 07:27 PM #8

You're facing the same challenge again? I'm here to help you find a solution. Could you share more details about the problem?