This model won't start when using a 3200MHz clock speed.

Pages (2): 1 2 Next

SmithScotland
Junior Member

08-28-2016, 09:25 PM

You recently installed 3200MHz RAM, but XMP settings aren't working. Someone could assist you with this issue.

SmithScotland

08-28-2016, 09:25 PM #1

You recently installed 3200MHz RAM, but XMP settings aren't working. Someone could assist you with this issue.

nicomini
Junior Member

09-19-2016, 08:11 PM

Adjusted voltage setting to 1.35 volts

nicomini

09-19-2016, 08:11 PM #2

Adjusted voltage setting to 1.35 volts

Capfreak
Member

103

09-26-2016, 10:16 PM

Previous attempt was unsuccessful.

Capfreak

09-26-2016, 10:16 PM #3

Previous attempt was unsuccessful.

jayx321
Junior Member

09-27-2016, 08:50 PM

Ensure RAM is placed in the correct slots as specified in the manual. If needed, disable XMP, adjust input speed and timing settings, and retry.

jayx321

09-27-2016, 08:50 PM #4

Ensure RAM is placed in the correct slots as specified in the manual. If needed, disable XMP, adjust input speed and timing settings, and retry.

Cheese1701
Junior Member

10-11-2016, 11:15 PM

Rejected the attempt.

Cheese1701

10-11-2016, 11:15 PM #5

Rejected the attempt.

McHillarX
Junior Member

10-12-2016, 12:55 AM

Check if the RAM in the file is labeled as 3200MHz.

McHillarX

10-12-2016, 12:55 AM #6

Check if the RAM in the file is labeled as 3200MHz.

Runnergirl15
Member

246

10-17-2016, 05:48 PM

Make sure the RAM is placed in the proper DIMM slots—usually the 2nd and 4th positions.

Runnergirl15

10-17-2016, 05:48 PM #7

Make sure the RAM is placed in the proper DIMM slots—usually the 2nd and 4th positions.

_mooch
Member

10-17-2016, 07:36 PM

It seems the item wasn't found. You mentioned having the F4-3200C16D-16GVKB.

_mooch

10-17-2016, 07:36 PM #8

It seems the item wasn't found. You mentioned having the F4-3200C16D-16GVKB.

_EmilyplayZMC_
Junior Member

10-18-2016, 04:13 AM

I haven't tested it myself. Have you checked slower speeds, such as 3000?

_EmilyplayZMC_

10-18-2016, 04:13 AM #9

I haven't tested it myself. Have you checked slower speeds, such as 3000?

spikes3411
Member

10-19-2016, 09:00 PM

#10

Current status: 2933 running, 16 timing cycle.

spikes3411

10-19-2016, 09:00 PM #10

Current status: 2933 running, 16 timing cycle.

Pages (2): 1 2 Next