This model won't appear in the system information menu.

F5F Stay Refreshed Hardware Desktop This model won't appear in the system information menu.

Janixx
Member

05-03-2016, 04:43 PM

Hey there! Your PC looks set up with the new components, but the M.2 SSD isn’t showing up despite Windows 10 Pro being installed. Try checking the BIOS settings for any SSD configuration changes or hardware detection issues. Also, ensure the SSD is properly seated and not damaged. If the problem persists, it might be a driver or firmware issue—restart your PC and see if it resolves.

Janixx

05-03-2016, 04:43 PM #1

Buddy_The_Hero
Member

224

05-03-2016, 05:15 PM

Buddy_The_Hero

05-03-2016, 05:15 PM #2

jojo__18
Junior Member

05-23-2016, 10:49 PM

I need to start from scratch entirely. I won’t invest extra time if it functions perfectly on the previous setup, especially since its condition is just 79%.

jojo__18

05-23-2016, 10:49 PM #3

I need to start from scratch entirely. I won’t invest extra time if it functions perfectly on the previous setup, especially since its condition is just 79%.

Alexis141
Member

109

05-31-2016, 12:10 AM

I didn't mean to revert everything exactly as it was. Combine the old components on a cardboard box and give it a try. Alternatively, purchase an NVME>USB enclosure and test it there.

Alexis141

05-31-2016, 12:10 AM #4

I didn't mean to revert everything exactly as it was. Combine the old components on a cardboard box and give it a try. Alternatively, purchase an NVME>USB enclosure and test it there.