This device uses the following connectors: USB, HDMI, and a power adapter.

F5F Stay Refreshed Hardware Desktop This device uses the following connectors: USB, HDMI, and a power adapter.

Gaspoda
Member

246

12-01-2016, 08:43 AM

I don’t have an 8pin and a 4pin from the PSU (Evga Supernova 550W). I’m not sure what I’m connecting here. This is my first build and it’s going really rough. The manuals are just pictures that don’t make sense, I’m really confused.

Gaspoda

12-01-2016, 08:43 AM #1

Agusz_XD
Junior Member

12-02-2016, 06:06 PM

The 4-pin connection is often optional. A single 8-pin setup usually suffices. Search for a cable marked "EPS" or "CPU". It should have a 4+4 connector, allowing separation into two 4-pin sections (typically).

Agusz_XD

12-02-2016, 06:06 PM #2

callme_crybaby
Junior Member

12-22-2016, 07:12 PM

These are confusing! Can you clarify what you mean?

callme_crybaby

12-22-2016, 07:12 PM #3

These are confusing! Can you clarify what you mean?

Sentio_Cege
Member

246

12-30-2016, 01:32 AM

They are positioned at the bottom right of the board. Refer to number 13 in your manual for details. A diagram will illustrate the exact placement.

Sentio_Cege

12-30-2016, 01:32 AM #4

They are positioned at the bottom right of the board. Refer to number 13 in your manual for details. A diagram will illustrate the exact placement.

lobetta333
Member

164

01-09-2017, 12:51 PM

appears within the system panel connectors section, item number 13

lobetta333

01-09-2017, 12:51 PM #5

appears within the system panel connectors section, item number 13

JamesHond7
Posting Freak

838

01-16-2017, 01:30 PM

You're wondering if the design matches a micro print on the motherboard. It sounds like you're trying to identify a specific component or marking. Let me know if you'd like further clarification!

JamesHond7

01-16-2017, 01:30 PM #6

You're wondering if the design matches a micro print on the motherboard. It sounds like you're trying to identify a specific component or marking. Let me know if you'd like further clarification!

Panda_1808
Member

01-18-2017, 09:10 AM

It's a USB 3.2 front panel connector designed for USB C. Few motherboards include a matching header, so you might need adapters. If you have a USB 3.0 header, you can use it directly; otherwise, consider a PCIe expansion card.

Panda_1808

01-18-2017, 09:10 AM #7

skully4117
Junior Member

01-20-2017, 03:07 AM

Check the front USB port on your motherboard—it probably doesn’t have one. Just set it aside.

skully4117

01-20-2017, 03:07 AM #8

Check the front USB port on your motherboard—it probably doesn’t have one. Just set it aside.