F5F Stay Refreshed Hardware Desktop This device is not responding and lacks power.

This device is not responding and lacks power.

This device is not responding and lacks power.

M
Mickael_Park
Member
216
08-29-2018, 07:23 PM
#1
I recently chose to enhance my home server/encoding PC with a Ryzen R7 1700. I connected it to a MSI Bazooka V2 B450 because I needed a Micro-ATX motherboard that fits into a Fractual Design Node 804. Today I received the board and haven’t heard back from it. I’ve observed that the EZ Debug LEDs remain off, is this typical? Do you know if this board shows any power signals? I’m sure on my ASUS ROG Strix B350 there are indicators for power status. Did I get a faulty unit? I’ve tried these steps: the CPU runs fine on my ASUS ROG Strix B350, the PSU powers both my gaming PC and my current server (an older i5 2500), I have the MSI board outside the case with just the CPU, RAM, and PSU connected. Turning the Power switch doesn’t get me started. There’s no sign of activity at all. I was wondering if someone could help me spot something obvious before I order a replacement from Amazon.
M
Mickael_Park
08-29-2018, 07:23 PM #1

I recently chose to enhance my home server/encoding PC with a Ryzen R7 1700. I connected it to a MSI Bazooka V2 B450 because I needed a Micro-ATX motherboard that fits into a Fractual Design Node 804. Today I received the board and haven’t heard back from it. I’ve observed that the EZ Debug LEDs remain off, is this typical? Do you know if this board shows any power signals? I’m sure on my ASUS ROG Strix B350 there are indicators for power status. Did I get a faulty unit? I’ve tried these steps: the CPU runs fine on my ASUS ROG Strix B350, the PSU powers both my gaming PC and my current server (an older i5 2500), I have the MSI board outside the case with just the CPU, RAM, and PSU connected. Turning the Power switch doesn’t get me started. There’s no sign of activity at all. I was wondering if someone could help me spot something obvious before I order a replacement from Amazon.

S
SuperTigresss
Posting Freak
768
08-29-2018, 11:48 PM
#2
Seems like a DOA board to me.
S
SuperTigresss
08-29-2018, 11:48 PM #2

Seems like a DOA board to me.

M
Mispisek
Member
177
09-06-2018, 09:56 PM
#3
No fans or graphics card? I’d add a CPU cooler and a GPU. Don’t depend only on LEDs to gauge workload.
M
Mispisek
09-06-2018, 09:56 PM #3

No fans or graphics card? I’d add a CPU cooler and a GPU. Don’t depend only on LEDs to gauge workload.

O
Olewww123
Senior Member
255
09-06-2018, 11:54 PM
#4
I installed two case fans—one for the CPU and another for the GPU—along with a CPU fan, a single RAM stick, and the power supply. I should mention that I’m now using the original server setup again, matching the same GPU, fans, and PSU, and everything is working fine so far.
O
Olewww123
09-06-2018, 11:54 PM #4

I installed two case fans—one for the CPU and another for the GPU—along with a CPU fan, a single RAM stick, and the power supply. I should mention that I’m now using the original server setup again, matching the same GPU, fans, and PSU, and everything is working fine so far.

G
Gunner12v
Junior Member
19
09-08-2018, 12:35 AM
#5
G
Gunner12v
09-08-2018, 12:35 AM #5