This adjustment alone may not be sufficient for long-term stability.

F5F Stay Refreshed Hardware Desktop This adjustment alone may not be sufficient for long-term stability.

Pages (2): 1 2 Next

Prismwind
Junior Member

01-15-2018, 02:55 PM

Hello, your adjustments of frequency to 3200 and voltage to 1.35 are valid. Check if the changes bring stability; otherwise, you may need further tweaks.

Prismwind

01-15-2018, 02:55 PM #1

Hello, your adjustments of frequency to 3200 and voltage to 1.35 are valid. Check if the changes bring stability; otherwise, you may need further tweaks.

Thybalt
Member

158

01-15-2018, 02:55 PM

Normal range for your test result.

Thybalt

01-15-2018, 02:55 PM #2

Normal range for your test result.

questking
Junior Member

01-15-2018, 02:55 PM

I understand, I was only adjusting the frequency and voltage. Was that sufficient, or should I also consider timing changes for better stability?

questking

01-15-2018, 02:55 PM #3

I understand, I was only adjusting the frequency and voltage. Was that sufficient, or should I also consider timing changes for better stability?

slayer__is
Senior Member

521

01-15-2018, 02:55 PM

Timing plays a big role in performance, so if you plan to add more work they make sense. At 1.35V 3200 there are few kits that won’t hit 16-20-20-38, but you might need to adjust to 16-18-18-38, 16-18-18-28, or even lower based on other conditions. Shorter timings mean less stability, so keep that in mind.

slayer__is

01-15-2018, 02:55 PM #4

GamerB08
Junior Member

01-15-2018, 02:55 PM

I felt quite uneasy about handling this minor task, especially since conditions seem steady. It might be safer to keep things as they are.

GamerB08

01-15-2018, 02:55 PM #5

I felt quite uneasy about handling this minor task, especially since conditions seem steady. It might be safer to keep things as they are.

PowergirlA
Member

229

01-15-2018, 02:55 PM

When XMP was enabled and set to 3200MHz, all adjustments were made correctly. No further changes needed.

PowergirlA

01-15-2018, 02:55 PM #6

When XMP was enabled and set to 3200MHz, all adjustments were made correctly. No further changes needed.

DriveIn
Senior Member

739

01-15-2018, 02:55 PM

Your XMP settings are configured at 2666, but you adjusted them yourself to 3200 and raised the voltage to 1.35.

DriveIn

01-15-2018, 02:55 PM #7

Your XMP settings are configured at 2666, but you adjusted them yourself to 3200 and raised the voltage to 1.35.

HellNether
Senior Member

731

01-15-2018, 02:55 PM

I see. In this scenario I wouldn't make any further adjustments if stability is confirmed. Typically you need to relax the timing parameters to achieve higher speeds, so stable performance with XMP settings for 2666 at 3200 is positive. If it doesn't meet your expectations for stability, you can attempt to adjust them slightly more.

HellNether

01-15-2018, 02:55 PM #8

MrBukkit
Member

215

01-15-2018, 02:55 PM

A MemTest86 execution would be helpful.

MrBukkit

01-15-2018, 02:55 PM #9

A MemTest86 execution would be helpful.

ExagonHD
Member

161

01-15-2018, 02:55 PM

#10

These appear to be your current settings. If you detect any issues, consider adjusting them to 16-20-20-38 as suggested.

ExagonHD

01-15-2018, 02:55 PM #10

These appear to be your current settings. If you detect any issues, consider adjusting them to 16-20-20-38 as suggested.

Pages (2): 1 2 Next