They won't appear unless you connect any ideas to your motherboard.

F5F Stay Refreshed Hardware Desktop They won't appear unless you connect any ideas to your motherboard.

Pages (2): 1 2 Next

Asianbv
Member

01-23-2018, 08:57 PM

Hey everyone, I'm facing a strange issue. When I power on my system, the MBOO splash screen doesn't appear, and I don't have an option to skip BIOS. The only way to enter BIOS is by swapping my DVI cable and connecting it from the GPU to the motherboard via IGUI. Anyone have any suggestions on how to fix this so I can boot into BIOS? I'm using an ASUS Z390-E motherboard.

Asianbv

01-23-2018, 08:57 PM #1

TdmFan92
Senior Member

602

01-25-2018, 04:40 AM

Send the BIOS update to the PCI-e port.

TdmFan92

01-25-2018, 04:40 AM #2

Send the BIOS update to the PCI-e port.

Gannon_
Junior Member

01-26-2018, 06:06 PM

Do you have any suggestions for working with a Z390-E board?

Gannon_

01-26-2018, 06:06 PM #3

Do you have any suggestions for working with a Z390-E board?

BoociTulip
Member

01-26-2018, 07:12 PM

Why bother with the BIOS key? It doesn’t really matter if it gets you in.

BoociTulip

01-26-2018, 07:12 PM #4

Why bother with the BIOS key? It doesn’t really matter if it gets you in.

rhyno747
Member

01-26-2018, 08:41 PM

It seems your GPU is not working properly.

rhyno747

01-26-2018, 08:41 PM #5

It seems your GPU is not working properly.

CryptoxYT
Junior Member

01-31-2018, 07:37 AM

He didn’t give clear details about the process, only noted the loss of the splash screen, so I thought it worked fine.

CryptoxYT

01-31-2018, 07:37 AM #6

He didn’t give clear details about the process, only noted the loss of the splash screen, so I thought it worked fine.

anakindaur
Senior Member

576

02-03-2018, 06:26 AM

I can't see bios without connecting my DVI cable to the motherboard, but my GPU is functioning perfectly otherwise.

anakindaur

02-03-2018, 06:26 AM #7

I can't see bios without connecting my DVI cable to the motherboard, but my GPU is functioning perfectly otherwise.

Inf3rno
Member

186

02-03-2018, 06:50 AM

Yes, the computer would work just fine to start Windows. For accessing BIOS, I’d need to turn it off and connect the display cable to the motherboard.

Inf3rno

02-03-2018, 06:50 AM #8

Yes, the computer would work just fine to start Windows. For accessing BIOS, I’d need to turn it off and connect the display cable to the motherboard.

zoiesays
Junior Member

02-03-2018, 08:42 AM

If needed, reset CMOS first. Make sure iGpu isn't configured as the main device. Also verify if the splash screen is turned off. That's about it.

zoiesays

02-03-2018, 08:42 AM #9

If needed, reset CMOS first. Make sure iGpu isn't configured as the main device. Also verify if the splash screen is turned off. That's about it.

huuskyjerk
Member

170

02-03-2018, 01:58 PM

#10

I reviewed the manual briefly—most likely you need to connect the monitor to the Motherboard’s DVI port. Open the BIOS, navigate to the TOOLS menu, then select the GPU Bus option and view GPU details. Confirm the PCI-e slot matches your GPU. In the BIOS settings, check the BOOT menu for CSM Compatibility support configuration. There shouldn’t be any adjustments there that influence GPU selection, though a PCI-E/PCI expansion device setting might need verification.

huuskyjerk

02-03-2018, 01:58 PM #10

Pages (2): 1 2 Next