These BSODs may result from various issues such as hardware faults, driver problems, or software conflicts.
These BSODs may result from various issues such as hardware faults, driver problems, or software conflicts.
Page fault in non-paged area Irql not less than or equal to System thread exception not handled. My RAM and SSD seem fine (at least I'm sure of it), but the BSOD keeps rebooting continuously. It won't even install Windows sometimes, though it does happen occasionally without any clear reason. I recently replaced my motherboard, CPU, and RAM, but this issue has never occurred before. Anyone have advice or solutions?
B450 F Asus gaming II Gtx 1080 ichill herculez Ryzen 7 5700x 2x16 gb 3600 mhz cl18 (installed successfully then crash occurred again) 2x8 3200 mhz cl16 (same issue) M.2 nvme intel 660p 512 gb Crucial 120gb ssd 1 tb hdd seasonic I attempted to detach all drives except Windows one but the problem persisted and moved Windows from Crucial SSD to M.2 still no improvement. Docp was enabled and no overclocking was done. I’m trying to access Windows now after turning off Docp and updating BIOS. This started after connecting a new system with an older one; it never happened before (R5 2600, 2x8 3200 mhz cl16 and B450M Prime A). It’s really strange and hard to figure out what’s causing it.
Your latest RAM arrived today with a CL14 G-Skill chip, 3200 MHz, and everything is working great. Your friend suggested 3600 MHz might be too high for your CPU, which he was correct about, and your old G-Skill RAM was just not functioning properly. Thanks for the support! <3