Thermal throttling in the Intel 9900K is common under high temperatures.

F5F Stay Refreshed Hardware Desktop Thermal throttling in the Intel 9900K is common under high temperatures.

Pages (3): 1 2 3 Next

bytez01
Junior Member

10-01-2018, 08:29 PM

I purchased all my components brand new about a year ago and use Intel XTU to undervolt my CPU occasionally. I realized this issue appears while playing Red Dead Redemption 2. Since I’m not familiar with motherboard tweaks, I rely on Intel XTU. It seems this hasn’t happened before. My frame rate stays the same, but my clock speeds drop. Even when I boost processor core ICC max, I still don’t see improvement. Any suggestions from fellow tech enthusiasts?

bytez01

10-01-2018, 08:29 PM #1

Rosen05
Member

152

10-03-2018, 04:56 AM

PL1 requires improvement in raising

Rosen05

10-03-2018, 04:56 AM #2

PL1 requires improvement in raising

Apinanski
Junior Member

10-03-2018, 11:52 AM

Sorry, I didn’t realize that. Could you clarify which choice is PL1 and where it can be found? Also, thank you for your patience.

Apinanski

10-03-2018, 11:52 AM #3

Sorry, I didn’t realize that. Could you clarify which choice is PL1 and where it can be found? Also, thank you for your patience.

VitoSEXY
Posting Freak

797

10-03-2018, 07:02 PM

Turbo Boost Power Max. PL2 refers to Turbo Boost Short Power Max. On a board like the Asus Z390-H, it performs poorly for power-hungry CPUs such as the 9900K or any Intel 14nm 8-core processor. I'm also assisting in reducing the board's performance so you're welcome.

VitoSEXY

10-03-2018, 07:02 PM #4

WokoGames
Junior Member

10-03-2018, 09:01 PM

There are still possibilities. How much you need to push PL1 matters. Raising PL2 might also help.

WokoGames

10-03-2018, 09:01 PM #5

There are still possibilities. How much you need to push PL1 matters. Raising PL2 might also help.

Schorschi1
Junior Member

10-03-2018, 09:10 PM

You retrieved PL2 instead of PL1. At full capacity 9900k with stock it generates roughly 170-200 watts under minimal effort.

Schorschi1

10-03-2018, 09:10 PM #6

You retrieved PL2 instead of PL1. At full capacity 9900k with stock it generates roughly 170-200 watts under minimal effort.

Aimone
Member

10-03-2018, 11:15 PM

You should aim for a higher setting, but check the specs carefully. The 95 W TDP is the maximum allowed by Intel, so increasing it further may not be safe or supported.

Aimone

10-03-2018, 11:15 PM #7

You should aim for a higher setting, but check the specs carefully. The 95 W TDP is the maximum allowed by Intel, so increasing it further may not be safe or supported.

meowtotoro
Member

10-05-2018, 02:50 PM

I will use only an H100i RGB AIO atm.

meowtotoro

10-05-2018, 02:50 PM #8

I will use only an H100i RGB AIO atm.

Leumas_R
Member

155

10-05-2018, 09:06 PM

125w maximum if you prefer not to witness the board overheat (or worse, when it fails to adjust properly). Intel’s TDP is just for appearances; on real boards that follow it, you’ll likely face constant power throttling.

Leumas_R

10-05-2018, 09:06 PM #9

jonny4203
Junior Member

10-08-2018, 05:20 PM

#10

It looks like you're exploring a different topic than the original request. If you'd like recommendations on AIO coolers or need help with something else, feel free to let me know!

jonny4203

10-08-2018, 05:20 PM #10

It looks like you're exploring a different topic than the original request. If you'd like recommendations on AIO coolers or need help with something else, feel free to let me know!

Pages (3): 1 2 3 Next