F5F Stay Refreshed Hardware Desktop Thermal Paste in CPU Pins - Dangerous?

Thermal Paste in CPU Pins - Dangerous?

Thermal Paste in CPU Pins - Dangerous?

X
XenonR4
Junior Member
19
03-05-2017, 08:49 AM
#1
I acquired a Ryzen 5 1400 at a great discount, but noticed thermal paste on several CPU pins on one side. Reports vary—some claim it’s harmless if applied correctly, while others warn it might harm the motherboard when the system powers up. Which perspective is accurate?
X
XenonR4
03-05-2017, 08:49 AM #1

I acquired a Ryzen 5 1400 at a great discount, but noticed thermal paste on several CPU pins on one side. Reports vary—some claim it’s harmless if applied correctly, while others warn it might harm the motherboard when the system powers up. Which perspective is accurate?

0
0sKHD
Member
226
03-05-2017, 09:55 AM
#2
Depends on the thermal paste that was used. Most of them shouldn't be conductive. Depending on how much there is, it could still prevent the pin(s) from making proper contact, causing the PC to not work. If the thermal paste is conductive (some are), then it could cause a short which could physically damage the machine. In any case, use some rubbing alcohol to clean it off. Make sure the CPU is completely dry before inserting it and powering on the machine.
0
0sKHD
03-05-2017, 09:55 AM #2

Depends on the thermal paste that was used. Most of them shouldn't be conductive. Depending on how much there is, it could still prevent the pin(s) from making proper contact, causing the PC to not work. If the thermal paste is conductive (some are), then it could cause a short which could physically damage the machine. In any case, use some rubbing alcohol to clean it off. Make sure the CPU is completely dry before inserting it and powering on the machine.

H
Helik3
Member
76
03-05-2017, 01:42 PM
#3
Just clean it up.
H
Helik3
03-05-2017, 01:42 PM #3

Just clean it up.

N
Narava
Member
70
03-08-2017, 12:17 AM
#4
It seems like you're expressing frustration about something not working well. You might want to try cleaning it instead.
N
Narava
03-08-2017, 12:17 AM #4

It seems like you're expressing frustration about something not working well. You might want to try cleaning it instead.

E
EmmyG123
Member
142
03-08-2017, 01:02 PM
#5
It happened to my brother using a bit of alcohol and a toothbrush to remove debris from the pins. I used a soft-bristled brush and handled it carefully, which made cleaning fast. After that, I allowed the alcohol to evaporate or dry.
E
EmmyG123
03-08-2017, 01:02 PM #5

It happened to my brother using a bit of alcohol and a toothbrush to remove debris from the pins. I used a soft-bristled brush and handled it carefully, which made cleaning fast. After that, I allowed the alcohol to evaporate or dry.