There seems to be a problem with the motherboard.

Pages (2): 1 2 Next

peppergirl123
Junior Member

01-08-2017, 06:01 AM

Hey everyone, I’m considering getting a new motherboard because I’m having problems with my current one. There’s no signal coming to my monitor, and it worked on another PC. I suspect the issue might be with the motherboard itself. Could you share some advice on the latest motherboards that fit my setup? I have a Ryzen 1600 CPU, GTX 1070 GPU, Corsair LX16 RAM (16GB, 3000MHz), and a Corsair RX 650 PSU.

peppergirl123

01-08-2017, 06:01 AM #1

Eusebio06
Senior Member

595

01-15-2017, 04:47 AM

Did you attempt to operate the RAM at 3000MHz and then reset the CMOS?

Eusebio06

01-15-2017, 04:47 AM #2

Did you attempt to operate the RAM at 3000MHz and then reset the CMOS?

lucca3002
Junior Member

01-18-2017, 09:27 AM

Move the GPU to a different slot

lucca3002

01-18-2017, 09:27 AM #3

Move the GPU to a different slot

Kittylu
Member

115

01-18-2017, 09:47 AM

I attempted to clear the CMOS but it didn't work.

Kittylu

01-18-2017, 09:47 AM #4

I attempted to clear the CMOS but it didn't work.

Losfun
Member

153

01-18-2017, 03:58 PM

Still nothing

Losfun

01-18-2017, 03:58 PM #5

Still nothing

iZacksS
Member

174

01-18-2017, 07:12 PM

Yes, you can install RAM in any available slot on your device.

iZacksS

01-18-2017, 07:12 PM #6

Yes, you can install RAM in any available slot on your device.

Aura_
Member

02-02-2017, 11:47 AM

I did it aswell.. just recommend me a brand of mobo which is good for overvlocking

Aura_

02-02-2017, 11:47 AM #7

I did it aswell.. just recommend me a brand of mobo which is good for overvlocking

Velizar06
Posting Freak

865

02-03-2017, 03:43 PM

Check for a fan spin or LED feature on the motherboard. If you have thermal paste, attempt to re-seat the CPU by unscrewing the cooler, twisting, and gently tilting it before pulling it up.

Velizar06

02-03-2017, 03:43 PM #8

Check for a fan spin or LED feature on the motherboard. If you have thermal paste, attempt to re-seat the CPU by unscrewing the cooler, twisting, and gently tilting it before pulling it up.

Kai_YoYo
Junior Member

02-06-2017, 06:03 AM

Mobos led is handling both the lighting and fans. I've re-applied thermal paste just like before.

Kai_YoYo

02-06-2017, 06:03 AM #9

Mobos led is handling both the lighting and fans. I've re-applied thermal paste just like before.

angelos51170
Junior Member

02-07-2017, 03:18 PM

#10

Don’t reapply thermal paste. Carefully remove the CPU and place it back gently.

angelos51170

02-07-2017, 03:18 PM #10

Don’t reapply thermal paste. Carefully remove the CPU and place it back gently.

Pages (2): 1 2 Next