F5F Stay Refreshed Hardware Desktop There is an issue with the new RX 6600 GPU.

There is an issue with the new RX 6600 GPU.

There is an issue with the new RX 6600 GPU.

_
_Cerber_YT
Junior Member
Find
4
07-30-2025, 06:37 PM
#1
Hello, here are some suggestions based on your situation. I have a Ryzen 5600 with an AORUS B550 Elite V2 (I’m not sure if the current BIOS is F15C), two 8GB DDR4 3200 MHz RAM units, previously owned a GTX 1660 Ti, which I replaced with an RX6600, and a Seasonic GX750W power supply. My issue is that after installing the RX6600, I don’t see any image or display, but I hear two beeps and possibly more, or a long beep followed by additional sounds. I checked all cables, especially the power connections, and confirmed the GPU is firmly attached to the motherboard. One of the fans spins while the other stops. When I swap in an RX6600 for testing, it works perfectly, so it might be something specific to that unit. I’m unsure about my exact board model, so I haven’t updated the BIOS yet. I placed the RX6600 on another board; the lights indicate CPU, DRAM, GPU, and boot status are all active, but no image appears. On that board, I don’t hear any beeps. Please let me know if you need more details.

Best regards
Reply
Reply
_
_Cerber_YT
07-30-2025, 06:37 PM #1

Hello, here are some suggestions based on your situation. I have a Ryzen 5600 with an AORUS B550 Elite V2 (I’m not sure if the current BIOS is F15C), two 8GB DDR4 3200 MHz RAM units, previously owned a GTX 1660 Ti, which I replaced with an RX6600, and a Seasonic GX750W power supply. My issue is that after installing the RX6600, I don’t see any image or display, but I hear two beeps and possibly more, or a long beep followed by additional sounds. I checked all cables, especially the power connections, and confirmed the GPU is firmly attached to the motherboard. One of the fans spins while the other stops. When I swap in an RX6600 for testing, it works perfectly, so it might be something specific to that unit. I’m unsure about my exact board model, so I haven’t updated the BIOS yet. I placed the RX6600 on another board; the lights indicate CPU, DRAM, GPU, and boot status are all active, but no image appears. On that board, I don’t hear any beeps. Please let me know if you need more details.

Best regards

Reply
Reply
I
Ipod984
Senior Member
Find
707
07-30-2025, 06:37 PM
#2
Did you apply DDU to eliminate all GPU drivers (intel, Nvidia, AMD) in Safe Mode, prior to replacing the Nvidia GPU with an AMD one?
Reply
Reply
I
Ipod984
07-30-2025, 06:37 PM #2

Did you apply DDU to eliminate all GPU drivers (intel, Nvidia, AMD) in Safe Mode, prior to replacing the Nvidia GPU with an AMD one?

Reply
Reply
S
Strikerxs2
Member
Find
168
07-30-2025, 06:37 PM
#3
Was die CMOS/BIOS zurückgesetzt?
BIOS sollte im UEFI-Modus sein, besonders bei modernen Grafikkarten.
Wenn man in einem anderen PC verschiedene Ausgänge für die GPU ausprobiert, ist meist nur eine bestimmte Option standardmäßig.
Reply
Reply
S
Strikerxs2
07-30-2025, 06:37 PM #3

Was die CMOS/BIOS zurückgesetzt?
BIOS sollte im UEFI-Modus sein, besonders bei modernen Grafikkarten.
Wenn man in einem anderen PC verschiedene Ausgänge für die GPU ausprobiert, ist meist nur eine bestimmte Option standardmäßig.

Reply
Reply
W
Wu_xj
Junior Member
Find
40
07-30-2025, 06:37 PM
#4
I interpreted it correctly, but the lack of a display seems unrelated to a driver problem. It might just indicate a different issue entirely.
Reply
Reply
W
Wu_xj
07-30-2025, 06:37 PM #4

I interpreted it correctly, but the lack of a display seems unrelated to a driver problem. It might just indicate a different issue entirely.

Reply
Reply
T
Theo6666
Junior Member
Find
10
07-30-2025, 06:37 PM
#5
Apologies for the delay in responding, but I'm occupied with my tasks.
The issue was resolved after applying the BIOS update.
Thank you everyone who took the time to assist me; I hope this could benefit someone else in a similar situation.
Best regards
Reply
Reply
T
Theo6666
07-30-2025, 06:37 PM #5

Apologies for the delay in responding, but I'm occupied with my tasks.
The issue was resolved after applying the BIOS update.
Thank you everyone who took the time to assist me; I hope this could benefit someone else in a similar situation.
Best regards

Reply
Reply