There is a sporadic boot problem involving a DRAM LED.
There is a sporadic boot problem involving a DRAM LED.
Yes, exactly. It sounds like the situation might be due to repeated issues with the same motherboard.
Being extremely unlucky has definitely occurred. The goal is to identify possible causes by carefully changing parts within the system or testing components in a functioning environment without issues. Check if the issue relates to a specific part, like RAM, or remains with the original host. Concerning RAM, these motherboards might be relevant:
https://download.gigabyte.com/FileL...23...0787ac304c
https://download.gigabyte.com/FileL...e_...7cf6ddc411
From Page 13 (Gaming motherboard).
"• When installing memory modules, make sure to install in the DDR5_A2 socket first."
Often overlooked or forgotten.
In summary, as @pete_101 points out, it appears the focus is on RAM. Review the compatible RAM options, physical setup, and configuration settings. The simpler choice seems to be either the wrong RAM or two faulty motherboards.
Yes, even if you're confident about the installation, using the correct slot order can still matter as long as both slots are properly filled during startup.
The installation sequence is important when specified and necessary. It varies based on the motherboard. Understanding the motherboard's specifications is essential. One of the factors to consider is the availability of SATA ports, as certain components may limit their use.
If available and reachable, set up detailed mode to reveal what happens during startup from power-up. The settings you need to adjust are those that provide a step-by-step view of the boot sequence. Look through the BIOS options for the board being used.
Checking the manual for your board at the provided link doesn't yield any matches to your description, unless you're overlooking something.
Fast boot has been disabled on both boards, I've never turned it on and it's off by default. I also don't see anything in the settings that sounds like what you're describing.
Is there a possibility at this point that there's an issue with my CPU? It's the only component I haven't swapped out.
If the CPU was placed on both motherboards—and the issue then followed the CPU—then yes, the CPU seems to be the cause.
For intermittent issues, it might be better to keep the current setup for a while longer.
Clear the Event Viewer logs to help identify any recorded problems.
According to the motherboard manuals:
"Status LEDs
These lights indicate whether the CPU, memory, graphics card, and operating system are functioning correctly after power-on. If the CPU/DRAM/VGA LED is active, it means the related device isn’t working properly; if the BOOT LED is on, it suggests you haven’t started the operating system yet."
Watch the BOOT LED during boot failure problems.