The workbench fails to power up completely
The workbench fails to power up completely
The HDD SATA cable remains unplugged. Only the power supply cable is connected to the drive. What’s the parts list? What occurs when you attempt to power it up? Does it begin and then shut down, enter a loop, start but no output appears, fails to start at all?
The image appears somewhat dated. I connected the SATA cable. It doesn’t power on at all parts of the RTX 3060 Ti I7 Pro B660.
There's also a 10pin connector on the motherboard cable that isn't plugged in to the power supply. At the PSU end of the motherboard cable there's 2 connectors that plug in to the power supply. You have the 18pin plugged in but not the 10pin. Check the power switch on the PSU as well.