F5F Stay Refreshed Hardware Desktop The wizard caused damage to my computer.

The wizard caused damage to my computer.

The wizard caused damage to my computer.

1
10th_Doctor_
Posting Freak
Find
768
04-04-2023, 12:55 AM
#1
I've adjusted the system settings from BIOS to boost performance using the EZ Tuning wizard and set XMP to 3200MHz. Everything functions normally except the monitor doesn't display anything. I've experimented with connecting the GPU and CPU as integrated GPUs, but no fix was found. Clearing the CMOS by removing the battery or using jumper cables didn't help either. Any ideas?
Reply
Reply
1
10th_Doctor_
04-04-2023, 12:55 AM #1

I've adjusted the system settings from BIOS to boost performance using the EZ Tuning wizard and set XMP to 3200MHz. Everything functions normally except the monitor doesn't display anything. I've experimented with connecting the GPU and CPU as integrated GPUs, but no fix was found. Clearing the CMOS by removing the battery or using jumper cables didn't help either. Any ideas?

Reply
Reply
S
saluttttt
Member
Find
67
04-17-2023, 05:18 AM
#2
Remove one RAM stick, restart to reset memory, then reinstall the second stick.
Reply
Reply
S
saluttttt
04-17-2023, 05:18 AM #2

Remove one RAM stick, restart to reset memory, then reinstall the second stick.

Reply
Reply
A
Amtrak10
Senior Member
Find
639
04-23-2023, 09:04 PM
#3
It wasn't useful.
Reply
Reply
A
Amtrak10
04-23-2023, 09:04 PM #3

It wasn't useful.

Reply
Reply
B
bane8551
Junior Member
Find
4
04-25-2023, 09:42 PM
#4
Did you clear the CMOS before swapping the RAM? It might help, so consider doing that too, along with removing both sticks and then reinserting one.
Reply
Reply
B
bane8551
04-25-2023, 09:42 PM #4

Did you clear the CMOS before swapping the RAM? It might help, so consider doing that too, along with removing both sticks and then reinserting one.

Reply
Reply
B
BlueStar_LH
Posting Freak
Find
842
05-07-2023, 05:44 AM
#5
Apologies for the delayed reply. It looks like I only adjusted EZTuning and XMP, not a full BIOS reset. It seems unusual that this issue persists.
Reply
Reply
B
BlueStar_LH
05-07-2023, 05:44 AM #5

Apologies for the delayed reply. It looks like I only adjusted EZTuning and XMP, not a full BIOS reset. It seems unusual that this issue persists.

Reply
Reply
O
opticgunship
Posting Freak
Find
815
05-14-2023, 06:06 AM
#6
It could be worth trying that approach. Perhaps as a final step before swapping components (like if you damaged the PSU with overclocking), remove the CMOS battery, disconnect the PSU from the wall, and keep pressing the power button to discharge it.
Reply
Reply
O
opticgunship
05-14-2023, 06:06 AM #6

It could be worth trying that approach. Perhaps as a final step before swapping components (like if you damaged the PSU with overclocking), remove the CMOS battery, disconnect the PSU from the wall, and keep pressing the power button to discharge it.

Reply
Reply
M
morganmerlin31
Member
Find
94
05-15-2023, 08:49 PM
#7
Thanks for your feedback. It seems like there might be an issue that needs addressing.
Reply
Reply
M
morganmerlin31
05-15-2023, 08:49 PM #7

Thanks for your feedback. It seems like there might be an issue that needs addressing.

Reply
Reply