The utterly unthinkable RAM issue I’m trying to locate hasn’t appeared in any online sources.
The utterly unthinkable RAM issue I’m trying to locate hasn’t appeared in any online sources.
The optimal choice is to buy a set of four matching kits. They are sold as a single unit. Using two RAM kits together may lead to issues. Even with identical brand names and speeds, this can cause problems.
It seems unlikely a 32GB drive would display only 16GB, even if faulty—it would likely read the full 32GB or not at all. I suspect you received a 2x16GB package instead of the 2x32GB set. That could also account for the 96GB reading when all four drives are connected. Please verify the labels on the new drives; it’s possible they were swapped accidentally.
Begin by removing every ram, both old and new. Capture the entire setup on camera, ensuring the serial number faces upward.
Based on what you’ve shared, the main issue seems to be the compatibility between different RAM kits. Older SK Hynix modules use 1.1V while newer Kingston ones are 1.4V, and mixing them often leads to unexpected behavior like displaying 16GB per stick or XMP not functioning. Dell’s advice about matching kits being the only safe option makes sense. I’d recommend trying the new 2×32 kit individually first. If it still shows 16GB each, it might be a faulty stick. If it works as 64GB together, the problem lies in mixing old and new RAM. With Alienware BIOS, fine voltage and timing settings aren’t available, making the system more sensitive. The best way to reach 128GB is to purchase a complete 4-stick set from the same batch. Otherwise, you’ll continue dealing with these inconsistencies.
They remain distinct, and if you truly read what I wrote, you’d realize I visited a brick-and-mortar shop without placing any orders.
I understand you're being clear about your position. You've already confirmed your decision and checked thoroughly. It seems the issue persists with both configurations, which is making you anxious. Let me know how I can help.
I understand. If both sticks now display only 16 GB each, it likely points to an issue with the SPD data or damaged modules. To verify, have you checked each stick in a different setup or used tools like Thaiphoon Burner/CPU-Z to check their status? This would help determine if the problem lies with the RAM or the Aurora board.