The system stopped working after running CL-LP on a Dell 4670K.

117

05-24-2016, 05:31 PM

Hey, I see what's happening. It sounds like the CL-LP might have caused instability. The blue screen messages could be related to overheating or incorrect timing settings. Make sure your CPU is properly seated and check the thermal paste application. If the issue persists, try resetting the BIOS or consulting the Dell support documentation for more details.

NotLate4Dinner

05-24-2016, 05:31 PM #1

Sveiv
Member

116

05-25-2016, 06:06 AM

Did it function prior to using the thermal paste? Could you share images of the CPU?

Sveiv

05-25-2016, 06:06 AM #2

Did it function prior to using the thermal paste? Could you share images of the CPU?

Raidex20
Posting Freak

751

05-25-2016, 08:57 AM

Shure, in fact I used AS5 before that.

Raidex20

05-25-2016, 08:57 AM #3

Shure, in fact I used AS5 before that.

Charliemc909
Posting Freak

898

05-29-2016, 11:05 PM

No pins bent in the CPU socket.

Charliemc909

05-29-2016, 11:05 PM #4

No pins bent in the CPU socket.

flame100123
Junior Member

05-30-2016, 01:34 AM

flame100123

05-30-2016, 01:34 AM #5

Trayleio
Member

06-12-2016, 04:31 AM

Checked if it's overclocked and looked at the Vcore voltage—maybe it's too low. RAM status? Also, should I use an XMP profile?

Trayleio

06-12-2016, 04:31 AM #6

Checked if it's overclocked and looked at the Vcore voltage—maybe it's too low. RAM status? Also, should I use an XMP profile?

Shardgale
Senior Member

547

06-12-2016, 04:42 AM

This setup uses the standard settings since I have a 500W power supply with a 780V output and it functions properly before adjusting the load.

Shardgale

06-12-2016, 04:42 AM #7

This setup uses the standard settings since I have a 500W power supply with a 780V output and it functions properly before adjusting the load.

smalls_2013
Member

132

06-19-2016, 10:24 PM

I examined the die and IHS, and I identified the issue—some terminals were outdated.

smalls_2013

06-19-2016, 10:24 PM #8

I examined the die and IHS, and I identified the issue—some terminals were outdated.