The system is busy.
The system is busy.
System recovery and trash folder allocate part of it for their own use, so lower the values you need for recovery and trash. Perform a disk cleanup inspection by checking each directory to identify files consuming all space; tools like WinDirStat can assist in this process.
After installation, always keep track of which files consume your hard drive space.
budginglime6
11-23-2016, 04:46 PM #12Click the link to get the software: http://www.uderzo.it/main_products/space...nload.html
After installation, always keep track of which files consume your hard drive space.
HotMilkTea
11-26-2016, 04:41 PM #13Thanks! I’m glad it gives you some confidence. Now you plan to purchase a new SSD or HDD and install the space on your drive C using the software you mentioned.
Ignored that task completely. Similar configuration as yours: 120GB SSD for C, remaining programs and files on another drive. The C driver only uses about 50GB. Ran space sniffer to identify what’s consuming your C drive. Had to adjust a system where the C drive was 1TB, but after a few days it became full. Scanned each folder and discovered a hidden temporary file consuming the whole drive.
ItsTheSoul
12-10-2016, 07:43 AM #17Sure, just to confirm, you're asking to verify if this is the final part and to appreciate my help while checking whether the video is genuine. Could you share the video link? Also, please let me know what you mean by "real" so I can assist better. Thank you!
from the motherboard by unplugging its SATA connection. 3. Power on the computer and navigate to the Boot Selection Menu on the motherboard. Press the appropriate key—ESC, F12, or F10—during startup, depending on your board’s specifications. 4. Choose USB Drive/Disk from the menu and boot into the USB stick you created. When the device loads, select the 120GB SSD as the source and the new SSD as the destination. The software will recognize each drive’s model to assist in choosing the correct one. For reference, see this guide: https://linhost.info/2012/05/cloning-a-d...g-utility/. Once cloning is done, power off the PC, remove the old SSD, connect its SATA cable to the new drive, and finally reinstall the HDD by reattaching its cable. Restart and test the system. If everything functions properly, you can proceed to launch Windows as usual.
You should upgrade from your current 120GB SSD to a larger one. Avoid swapping your main storage drive with an HDD. Obtain and set up the Drive Cloning tool at http://www.easeus.com/disk-copy/index.htm. Use the free "Disk-Copy Home" version and download it here: http://download.easeus.com/free/EaseUS_D...y_Home.exe. Execute the installer to generate a bootable USB drive. You'll need an additional USB drive for this process—a 4GB or higher is ideal, though a smaller size may suffice. After the setup completes, follow these steps: 1. Insert the new SSD into your system using a compatible SATA cable. 2. Disconnect the existing HDD (drive E from the motherboard by unplugging its SATA connection. 3. Power on the computer and navigate to the Boot Selection Menu on the motherboard. Press the appropriate key—ESC, F12, or F10—during startup, depending on your board’s specifications. 4. Choose USB Drive/Disk from the menu and boot into the USB stick you created. When the device loads, select the 120GB SSD as the source and the new SSD as the destination. The software will recognize each drive’s model to assist in choosing the correct one. For reference, see this guide: https://linhost.info/2012/05/cloning-a-d...g-utility/. Once cloning is done, power off the PC, remove the old SSD, connect its SATA cable to the new drive, and finally reinstall the HDD by reattaching its cable. Restart and test the system. If everything functions properly, you can proceed to launch Windows as usual.
I would skip that specific program because it initiates the cloning process while you're using Windows, leading to complications. The alternative I mentioned works better since it operates from a bootable USB drive, running its own lightweight operating system.
You can reclaim some storage by turning off Hibernation, which can free around 10GB or more—see the support guide. Transfer your pagefile to an E: drive for additional space, roughly 4-8GB or more. Use CCleaner to remove unnecessary files like system restore points, temporary data, and internet cache. Shift your libraries to the same E: drive for better organization.