The system fails to display a signal.
The system fails to display a signal.
Someone, could you assist me? My PC has lights and fans running but no signal appears. I replaced the RAM and swapped the slots, the monitor works fine, I reset CMOS, took everything out and put it back in, yet nothing shows. The last thing I did was install Windows Media once, about three times because I was trying to install the second hard drive and set the first as primary. PLEASE HELP🙌🏽
Can you view the image in BIOS? And what happens when you connect to MB?
I can’t see the bios at all, even though I tried clicking f1 once before. It didn’t work on my first attempt, but I had no operating system installed, so I turned it off. Then I plugged in the Windows installation media USB again, but it still showed no signal. I removed the USB and checked if the issue was with the USB, but there was still no signal. I also tried connecting to the motherboard and using a GPU, but nothing worked. Thanks for your help!
Consider deactivating the CMOS battery to refresh your BIOS configuration, which could be beneficial.
Turn it on using the F4 key several times, but if you don’t have your Windows installation media USB drive on the PC, plug it in, turn off the computer, and try again—it won’t work. If you’re planning to take it out for two minutes and then put it back in, it won’t function either.
Could the media creation tool within the stick be damaged? Please ensure it is reinstalled on the same device or a different USB drive if available.