The stock voltage for Ryzen 5 2600X is typically 1.8V to 1.9V.

pocio77
Posting Freak

783

01-19-2018, 02:45 AM

You're seeing a voltage range of 1.398 to 1.426V during setup, which is higher than expected. This could indicate an issue with the BIOS or power supply. Your system has the MSI B450M Ryzen 5 2600X with a stock cooler.

pocio77

01-19-2018, 02:45 AM #1

Deurman
Member

120

01-19-2018, 03:44 AM

I'm not a Ryzen enthusiast, but those voltages look excessive for any CPU. Would it help to check if a BIOS update is available?

Deurman

01-19-2018, 03:44 AM #2

I'm not a Ryzen enthusiast, but those voltages look excessive for any CPU. Would it help to check if a BIOS update is available?

Taybaybay
Posting Freak

850

01-20-2018, 01:13 PM

Updated the bios but the changes haven't taken effect yet. I'm keeping the voltage offset at -0.200v until I verify the stock voltage levels.

Taybaybay

01-20-2018, 01:13 PM #3

Updated the bios but the changes haven't taken effect yet. I'm keeping the voltage offset at -0.200v until I verify the stock voltage levels.

JakeTheTiger
Member

216

01-20-2018, 08:28 PM

These voltages are acceptable, but you might be able to apply a negative offset to lower them for better efficiency. It’s reasonable to consider values beyond -0.200V.

JakeTheTiger

01-20-2018, 08:28 PM #4

These voltages are acceptable, but you might be able to apply a negative offset to lower them for better efficiency. It’s reasonable to consider values beyond -0.200V.

CiscoMiner
Senior Member

500

01-20-2018, 09:43 PM

Is the system experiencing stress? Ryzen shows elevated voltage during idle, yet it doesn’t harm the CPU—adjusting via BIOS could resolve this.

CiscoMiner

01-20-2018, 09:43 PM #5

Is the system experiencing stress? Ryzen shows elevated voltage during idle, yet it doesn’t harm the CPU—adjusting via BIOS could resolve this.

peter4everpan
Member

235

02-05-2018, 10:46 PM

The voltage is correct. It typically increases to about 1.45v. The Ryzen can handle up to 1.5v safely.

peter4everpan

02-05-2018, 10:46 PM #6

The voltage is correct. It typically increases to about 1.45v. The Ryzen can handle up to 1.5v safely.

Escrotocraft
Junior Member

02-07-2018, 10:18 PM

Also, the 1.45 to 1.5 range applies only to brief moments (during the quick boost phase). Anything kept up past 1.425 seems to be entering risky territory.

Escrotocraft

02-07-2018, 10:18 PM #7

Also, the 1.45 to 1.5 range applies only to brief moments (during the quick boost phase). Anything kept up past 1.425 seems to be entering risky territory.

Nacho3000
Junior Member

02-15-2018, 02:01 PM

When the CPU is using its standard configuration, performance remains typical. Occasionally a core increases its output as it handles background processes; to reach peak performance, the voltage is raised temporarily to maintain the desired clock rate.

Nacho3000

02-15-2018, 02:01 PM #8

XxGrenidierXx
Posting Freak

813

02-15-2018, 04:12 PM

Thank you for your messages. I kept it on the - Voltage Offset setting, ran the Aida64 for a few hours, and everything worked fine.

XxGrenidierXx

02-15-2018, 04:12 PM #9

Thank you for your messages. I kept it on the - Voltage Offset setting, ran the Aida64 for a few hours, and everything worked fine.