F5F Stay Refreshed Hardware Desktop The signal doesn't exceed 3.6GHz.

The signal doesn't exceed 3.6GHz.

The signal doesn't exceed 3.6GHz.

Pages (2): 1 2 Next
O
OryGuy
Junior Member
3
03-21-2020, 07:29 AM
#1
Hello, good morning. I’m planning to get an AI for my CPU soon and wanted to know how to boost the boost clocks further. I’ve tried pushing past 3.6GHz but it keeps hitting that limit. The BIOS target is set at 3.6GHz, so how can I raise it? I currently have a solid overclock stable in BIOS and feel much faster. My board is an Intel B550-F Gaming.
O
OryGuy
03-21-2020, 07:29 AM #1

Hello, good morning. I’m planning to get an AI for my CPU soon and wanted to know how to boost the boost clocks further. I’ve tried pushing past 3.6GHz but it keeps hitting that limit. The BIOS target is set at 3.6GHz, so how can I raise it? I currently have a solid overclock stable in BIOS and feel much faster. My board is an Intel B550-F Gaming.

W
WikiliZ
Member
196
03-21-2020, 08:53 AM
#2
Which cooler are you using to enable high clock speeds? Consider updating the BIOS, install Ryzen Master, and attempt auto overclocking.
W
WikiliZ
03-21-2020, 08:53 AM #2

Which cooler are you using to enable high clock speeds? Consider updating the BIOS, install Ryzen Master, and attempt auto overclocking.

S
Staranne
Junior Member
16
03-26-2020, 04:00 AM
#3
BIOS is the newest version, Ryzen Master supports up to 3.6GHz, and the current cooler is Be Quiet Pure Rock 2 FX featuring a high airflow design. During gaming at ultra settings, temperatures stay at 55°C.
S
Staranne
03-26-2020, 04:00 AM #3

BIOS is the newest version, Ryzen Master supports up to 3.6GHz, and the current cooler is Be Quiet Pure Rock 2 FX featuring a high airflow design. During gaming at ultra settings, temperatures stay at 55°C.

J
JayBatMe
Member
63
03-28-2020, 04:12 AM
#4
Navigate to the advanced settings and enable auto overclocking if needed (this may already be configured).
J
JayBatMe
03-28-2020, 04:12 AM #4

Navigate to the advanced settings and enable auto overclocking if needed (this may already be configured).

M
MONSTERmoose91
Senior Member
526
03-28-2020, 06:48 AM
#5
Already tried game mode, PBO, Auto OC and Curve Optimizer. The only unusual thing I notice is the BIOS setting shows a target clock of 3.6GHz, which might be restricting performance.
M
MONSTERmoose91
03-28-2020, 06:48 AM #5

Already tried game mode, PBO, Auto OC and Curve Optimizer. The only unusual thing I notice is the BIOS setting shows a target clock of 3.6GHz, which might be restricting performance.

T
Trustywolf
Junior Member
42
03-28-2020, 03:22 PM
#6
You don't require an AIO for that CPU; you could switch to a Thermalright Peerless Assassin 120, which is much more affordable if you're looking for... But your existing CPU cooler should be sufficient for your 5700X. That seems odd, since your 5700X would likely perform much better. I'm currently using a 212 EVO on my overclocked 5700X, reaching 4.65GHz across all cores. There might be an issue with the BIOS settings or the BIOS itself.
T
Trustywolf
03-28-2020, 03:22 PM #6

You don't require an AIO for that CPU; you could switch to a Thermalright Peerless Assassin 120, which is much more affordable if you're looking for... But your existing CPU cooler should be sufficient for your 5700X. That seems odd, since your 5700X would likely perform much better. I'm currently using a 212 EVO on my overclocked 5700X, reaching 4.65GHz across all cores. There might be an issue with the BIOS settings or the BIOS itself.

C
Chef_Pug
Junior Member
46
03-28-2020, 09:25 PM
#7
I understand, I prefer additional fans along with an AIO mainly for room size, appearance, and room for future CPU upgrades.
C
Chef_Pug
03-28-2020, 09:25 PM #7

I understand, I prefer additional fans along with an AIO mainly for room size, appearance, and room for future CPU upgrades.

B
Bifes_PT
Member
205
03-29-2020, 03:22 AM
#8
I can't send screenshots.
B
Bifes_PT
03-29-2020, 03:22 AM #8

I can't send screenshots.

L
Llabros
Senior Member
740
03-29-2020, 07:45 PM
#9
Reset the CMOS, turn on XMP, activate PBO in PBO with manual settings, then set PPT, EDT and TDC to 150 In curve optimizer. You’ll need to test it yourself; auto OC might be causing the problem. Suggest starting with a -15 all core offset.
L
Llabros
03-29-2020, 07:45 PM #9

Reset the CMOS, turn on XMP, activate PBO in PBO with manual settings, then set PPT, EDT and TDC to 150 In curve optimizer. You’ll need to test it yourself; auto OC might be causing the problem. Suggest starting with a -15 all core offset.

D
DrHeld
Junior Member
1
03-30-2020, 04:41 PM
#10
Already performed CMOS reset, reinstalled BIOS and flashed again; didn’t apply the PBO method you referenced. Curve Optimizer was configured at -30.
D
DrHeld
03-30-2020, 04:41 PM #10

Already performed CMOS reset, reinstalled BIOS and flashed again; didn’t apply the PBO method you referenced. Curve Optimizer was configured at -30.

Pages (2): 1 2 Next