The Ryzen 2200g overclocking issue is clearly shown in this image.
The Ryzen 2200g overclocking issue is clearly shown in this image.
I recently purchased a custom-built PC and its specifications are
Ryzen 3 2200g with Vega 8 graphics
MSI B350 PC Mate
Stock cooler
Team Vulcan DDR4 3000mhz RAM
Initially, I overclocked the RAM, though both were running at different speeds (around 2666mhz), and I set it to 3000mhz. One was at 2860 and the other at 2933. After booting, everything worked fine, but I didn’t adjust the RAM voltage. I believe I used an XMP2 profile.
I then downloaded some games to boost FPS with overclocking. I used the Ryzen Master software to move the frequency from 3.5GHz to 3.7GHz without changing the voltage.
Next, I upgraded the graphics card from 400MHz to 600MHz, also without altering the voltage, and restarted the system.
However, the issue began when I tried to boot into BIOS or Safe Mode—fans spun slowly, no EZ-debug lights appeared, and my monitor displayed "no signal." I attempted a CMOS reset, but nothing resolved the problem.
In summary, my main concern is understanding what went wrong and how to clear the CMOS.
Consider raising your CPU and GPU voltage for better performance. For longer CPU life, keep it at around 1.4 volts on an OC Ryzen while keeping temperatures below 80°C. Set the CPU to 1.4 volts at 3800MHz and monitor stability with a tool like Prime95. Gradually lower the voltage while ensuring stability after each change. You may then attempt to overclock the GPU further. I don’t have any GPU overclocking experience to share.
Consider raising your CPU and GPU voltage for better performance. For longer CPU life, keep it at around 1.4 volts on an OC Ryzen while keeping temperatures below 80°C. Set the CPU to 1.4 volts at 3800MHz and monitor stability with a tool like Prime95. Gradually lower the voltage while maintaining stability after each change. This will allow you to push the GPU further. I don’t have any GPU OC experience to guide you.