F5F Stay Refreshed Hardware Desktop The PSU fan noise is excessively loud.

The PSU fan noise is excessively loud.

The PSU fan noise is excessively loud.

E
190
01-11-2020, 08:22 PM
#1
Hi! Your PC from 2017 is in great shape overall. The main issue is the PSU fan making a lot of noise, even during intense gaming. You've already replaced the fan, but it hasn't helped. Since you don’t want to buy another PSU, here are some ideas to reduce vibration: check if the fan is properly secured, consider adding a damping pad or rubber mount, or look into upgrading to a quieter PSU model. Let me know what you try!
E
Ender_Girl_LAF
01-11-2020, 08:22 PM #1

Hi! Your PC from 2017 is in great shape overall. The main issue is the PSU fan making a lot of noise, even during intense gaming. You've already replaced the fan, but it hasn't helped. Since you don’t want to buy another PSU, here are some ideas to reduce vibration: check if the fan is properly secured, consider adding a damping pad or rubber mount, or look into upgrading to a quieter PSU model. Let me know what you try!

O
OMGCammy
Junior Member
27
01-12-2020, 10:02 AM
#2
The fan was replaced, but the noise remains? It could be either both units are faulty or just this one is causing the disturbance.
O
OMGCammy
01-12-2020, 10:02 AM #2

The fan was replaced, but the noise remains? It could be either both units are faulty or just this one is causing the disturbance.

S
Smiky007
Junior Member
16
01-12-2020, 08:48 PM
#3
It's not the fan turning—it's the fan shaking. The power supply unit is constructed from inexpensive, thin metal that moves due to the fan, causing the sound. I'm looking for a way to insert something between the fan and the PSU cover to dampen the vibrations. Appreciate the help!
S
Smiky007
01-12-2020, 08:48 PM #3

It's not the fan turning—it's the fan shaking. The power supply unit is constructed from inexpensive, thin metal that moves due to the fan, causing the sound. I'm looking for a way to insert something between the fan and the PSU cover to dampen the vibrations. Appreciate the help!

A
Adabelle
Senior Member
724
01-13-2020, 12:50 AM
#4
It's a Tier E model—don't be shocked if it doesn't work as expected. Just a heads-up. If swapping the fan for a reliable one didn't silence the noise, the issue likely lies elsewhere. You can halt fans by pressing on the hub; do this gradually across all fans until you pinpoint the source.
A
Adabelle
01-13-2020, 12:50 AM #4

It's a Tier E model—don't be shocked if it doesn't work as expected. Just a heads-up. If swapping the fan for a reliable one didn't silence the noise, the issue likely lies elsewhere. You can halt fans by pressing on the hub; do this gradually across all fans until you pinpoint the source.

R
Ratlover555
Member
62
01-13-2020, 05:15 AM
#5
I turned off the fan. It ceased shaking. The issue seems to be a low-cost power supply causing the chassis to vibrate.
R
Ratlover555
01-13-2020, 05:15 AM #5

I turned off the fan. It ceased shaking. The issue seems to be a low-cost power supply causing the chassis to vibrate.

V
vortex_42
Junior Member
15
01-14-2020, 06:09 AM
#6
You can use rubber grommets to separate the fan from the PSU. Be cautious during installation—it may be dangerous because capacitors keep holding charge even when the device is off. Make sure to unplug the PSU first, then press and hold the power button for roughly 10 seconds to safely discharge the capacitors.
V
vortex_42
01-14-2020, 06:09 AM #6

You can use rubber grommets to separate the fan from the PSU. Be cautious during installation—it may be dangerous because capacitors keep holding charge even when the device is off. Make sure to unplug the PSU first, then press and hold the power button for roughly 10 seconds to safely discharge the capacitors.

B
BlitzSquadHD
Member
195
01-14-2020, 11:07 PM
#7
Thanks for the response. I'll give it a shot and let me know how it goes.
B
BlitzSquadHD
01-14-2020, 11:07 PM #7

Thanks for the response. I'll give it a shot and let me know how it goes.

K
KoalaLife
Junior Member
25
01-21-2020, 04:36 PM
#8
My audience isn't responding. I can place a single fan upright on my desk while spinning at 1500rpm without any noise. I'd suggest your fans aren't functioning properly. Edited July 29, 2023 by leclod
K
KoalaLife
01-21-2020, 04:36 PM #8

My audience isn't responding. I can place a single fan upright on my desk while spinning at 1500rpm without any noise. I'd suggest your fans aren't functioning properly. Edited July 29, 2023 by leclod

M
mikaelmt
Junior Member
16
01-26-2020, 07:13 AM
#9
Old and new users alike remain still on a surface, showing no movement except when connected to the PSU. Their vibration comes solely from the unusual connection method between the chassis and fan shroud.
M
mikaelmt
01-26-2020, 07:13 AM #9

Old and new users alike remain still on a surface, showing no movement except when connected to the PSU. Their vibration comes solely from the unusual connection method between the chassis and fan shroud.

P
Paardendrol
Junior Member
19
01-26-2020, 02:55 PM
#10
I've made some adjustments between the fan and PSU cover, which really improved performance. Still, it remains the loudest part of the setup. I plan to upgrade to a high-quality fan and when the PSU fails, I'll just use that fan on the case and power it via MOLEX.
P
Paardendrol
01-26-2020, 02:55 PM #10

I've made some adjustments between the fan and PSU cover, which really improved performance. Still, it remains the loudest part of the setup. I plan to upgrade to a high-quality fan and when the PSU fails, I'll just use that fan on the case and power it via MOLEX.