F5F Stay Refreshed Hardware Desktop The processor is getting quite warm now, could this affect its performance over time?

The processor is getting quite warm now, could this affect its performance over time?

The processor is getting quite warm now, could this affect its performance over time?

Pages (3): 1 2 3 Next
R
RonanWilk
Member
158
10-24-2022, 07:21 AM
#1
Hey there, I recently assembled a PC for a friend using the Ryzen 5 7600X. Because of stock shortages, I opted for the NZXT T120 Air cooler. It includes one fan, but I added an extra one since the unit supports it. I thought it would be sufficient to manage the CPU, given that the case comes with large intake fans (Lanckair 217). However, temperatures are actually higher than expected. The CPU stays around 50–55°C when idle, but climbs up to 95°C during full load. After some undervolting, I was able to lower peak temps to about 90°C. Still, during intense tasks like After Effects rendering or heavy workloads, the CPU runs at full capacity for several minutes at a time. My worry is whether these temperatures could pose any long-term risks. My friend mainly plays games and edits videos, so it’s not a daily intensive setup. I intend to switch to an all-in-one cooler later. This air cooler was just a stopgap because local options were limited and prices were high. Thanks in advance!
R
RonanWilk
10-24-2022, 07:21 AM #1

Hey there, I recently assembled a PC for a friend using the Ryzen 5 7600X. Because of stock shortages, I opted for the NZXT T120 Air cooler. It includes one fan, but I added an extra one since the unit supports it. I thought it would be sufficient to manage the CPU, given that the case comes with large intake fans (Lanckair 217). However, temperatures are actually higher than expected. The CPU stays around 50–55°C when idle, but climbs up to 95°C during full load. After some undervolting, I was able to lower peak temps to about 90°C. Still, during intense tasks like After Effects rendering or heavy workloads, the CPU runs at full capacity for several minutes at a time. My worry is whether these temperatures could pose any long-term risks. My friend mainly plays games and edits videos, so it’s not a daily intensive setup. I intend to switch to an all-in-one cooler later. This air cooler was just a stopgap because local options were limited and prices were high. Thanks in advance!

O
onelolo57
Member
62
10-24-2022, 07:29 AM
#2
On paper it looks like a decent cooler, but it should still manage your CPU workload. It might be related to your case’s airflow setup—check the number of intake and exhaust ports, their positioning, and the model you’re using.
O
onelolo57
10-24-2022, 07:29 AM #2

On paper it looks like a decent cooler, but it should still manage your CPU workload. It might be related to your case’s airflow setup—check the number of intake and exhaust ports, their positioning, and the model you’re using.

L
levoyageur92
Posting Freak
807
10-24-2022, 02:18 PM
#3
Hey, thanks for the reply! I'm using the LIAN LI LANCOOL 217X case with the stock fans it comes with, which are two 240mm intake fans at the front, one 120mm intake fan mounted at the bottom, and a single 120mm exhaust fan at the rear. Do you think this setup might be causing negative air pressure since there's only one exhaust fan? The airflow seems fine overall, especially since the GPU stays under 65°C even under full load. I'll attach a picture of the case for reference.
L
levoyageur92
10-24-2022, 02:18 PM #3

Hey, thanks for the reply! I'm using the LIAN LI LANCOOL 217X case with the stock fans it comes with, which are two 240mm intake fans at the front, one 120mm intake fan mounted at the bottom, and a single 120mm exhaust fan at the rear. Do you think this setup might be causing negative air pressure since there's only one exhaust fan? The airflow seems fine overall, especially since the GPU stays under 65°C even under full load. I'll attach a picture of the case for reference.

Z
ZXmonster
Junior Member
2
10-24-2022, 06:36 PM
#4
It's a positive pressure configuration because the number of incoming airflow exceeds the outgoing. This is ideal since it helps reduce dust accumulation.
Z
ZXmonster
10-24-2022, 06:36 PM #4

It's a positive pressure configuration because the number of incoming airflow exceeds the outgoing. This is ideal since it helps reduce dust accumulation.

S
ScoutandMilo
Member
71
10-24-2022, 08:02 PM
#5
Ensure you have sufficient thermal paste applied; otherwise, it might not be the main issue. Consider using fan control software for better performance.
S
ScoutandMilo
10-24-2022, 08:02 PM #5

Ensure you have sufficient thermal paste applied; otherwise, it might not be the main issue. Consider using fan control software for better performance.

_
_GodPotato_
Member
105
10-24-2022, 09:35 PM
#6
Replace the CPU cooler. Clean thoroughly before reapplying paste. If you just installed it, use a dry cloth—no alcohol needed. Form a smooth area in the center and secure the cooler firmly. Tighten each screw slightly in an X-shape.
_
_GodPotato_
10-24-2022, 09:35 PM #6

Replace the CPU cooler. Clean thoroughly before reapplying paste. If you just installed it, use a dry cloth—no alcohol needed. Form a smooth area in the center and secure the cooler firmly. Tighten each screw slightly in an X-shape.

C
Cate17
Member
57
11-01-2022, 11:32 PM
#7
Thanks for the update. I've already replaced the CPU and adjusted the fan settings in the BIOS. The room temperature is currently about 30°C, which might be affecting the heat levels. I'm planning to try a different thermal paste next time instead of the one that came with the cooler.
C
Cate17
11-01-2022, 11:32 PM #7

Thanks for the update. I've already replaced the CPU and adjusted the fan settings in the BIOS. The room temperature is currently about 30°C, which might be affecting the heat levels. I'm planning to try a different thermal paste next time instead of the one that came with the cooler.

N
Nero12321
Posting Freak
858
11-02-2022, 12:51 AM
#8
Okay! Well, my room gets to be as hot as yours is, and even with an overclocked CPU using the stock HP cooler, I don't get temps above 85c. I know my CPU is lower end than yours, but actually, they use the same wattage (and mine will use more when overclocked).
N
Nero12321
11-02-2022, 12:51 AM #8

Okay! Well, my room gets to be as hot as yours is, and even with an overclocked CPU using the stock HP cooler, I don't get temps above 85c. I know my CPU is lower end than yours, but actually, they use the same wattage (and mine will use more when overclocked).

F
Flower_Mermaid
Member
192
11-02-2022, 02:20 AM
#9
Sure, adding three more exhaust fans at the top should help improve airflow.
F
Flower_Mermaid
11-02-2022, 02:20 AM #9

Sure, adding three more exhaust fans at the top should help improve airflow.

M
Mmmmmm_Donuts
Member
103
11-04-2022, 09:04 PM
#10
Glad to hear it! I'll install the CPU using a high-quality thermal paste this time. Appreciate the clear guidance!
M
Mmmmmm_Donuts
11-04-2022, 09:04 PM #10

Glad to hear it! I'll install the CPU using a high-quality thermal paste this time. Appreciate the clear guidance!

Pages (3): 1 2 3 Next