The problem with my Dell Optiplex 790 is that it won’t start up.
The problem with my Dell Optiplex 790 is that it won’t start up.
My Dell Optiplex 790 prompted me to incorporate a GeForce GTX 1050 and a 600-watt power supply. However, after installing the 1050 and PSU, the system failed to initialize. Replacing it with my older GeForce GT 710 and existing PSU also resulted in no POST. I’ve attempted utilizing the onboard graphics, yet nothing occurred. Switching PCIe slots did not resolve the issue either. Moreover, during removal of the motherboard from the case, it was handled with some force, leaving me uncertain about potential damage that may have occurred during the process.
Attempt to start in Secure Mode (F8). This is likely due to the previous graphics card. Establish a System Restore point and uninstall the drivers for your outdated GPU. Subsequently, within Secure Mode with Internet access, install the new graphics card and its drivers. Installing them might necessitate a full Windows restart, but the video quality should remain stable until completion.
Consider reinstalling the Dell power supply; it is capable of adequately powering a GTX 1050Ti.
Dell’s power supply outputs are consistent, unlike the “peak” wattage often quoted by manufacturers for aftermarket components. Their power delivery usually exceeds their stated ratings by 50-100 watts during testing.
The problem’s nature isn't defined. Determine if you can access the system BIOS, and if not, attempt to remove and reinsert your RAM modules. Confirm that all cables are securely attached to the motherboard. Additionally, after a power supply change, ensure you’ve connected the fan cable for your graphics card – some users overlook this. Finally, check whether your graphics card requires an additional power source.
The problem’s nature isn't defined. Could you access the system BIOS? Let’s try removing and reinstalling your RAM modules, ensuring all cables are properly connected to the motherboard. Occasionally, after a power supply change, new users neglect to connect the fan’s heat sink cable. Additionally, confirm that your graphics card requires an external power source – you've already connected it, of course. The monitor is displaying absolutely nothing, and despite reinstalling the RAM and connecting all cables, including the GPU’s power connector (which you've confirmed is plugged in), there’s still no output.
Attempt to initiate Windows in Safe Mode (using the F8 key). This may be successful with your previous graphics card. Establish a System Restore point and uninstall the drivers for your outdated GPU. Subsequently, within Safe Mode with Internet access, install the new graphics card and its associated drivers. Installing these may necessitate a full system restart, but video resolution should remain stable until completion.
Consider reintroducing the Dell power supply unit; it is likely sufficient for powering the GTX 1050Ti.
Dell power supplies deliver sustained output, unlike the peak wattage figures often promoted by manufacturers for aftermarket components. They usually provide a 50-100 watt surplus when subjected to testing.
[https://www.hardwareinsights.com/dell-h3...ly-review/]