The powerline kit is running slowly.
The powerline kit is running slowly.
I have the TPlink powerline kits to extend internet coverage throughout the house, as I prefer having my console and PC connected via wired internet instead of Wi-Fi. While it works well most of the time, my speeds are dropping significantly—only around 12 Mbps when the advertised maximum is 500 Mbps. I know reaching that level isn’t realistic, but is there a method to boost performance since I already see strong signals inside the house?
We use a specific kit and measure speeds using a defined method.
These speeds are likely measured by Speedtest. Alternatively, downloads from services like Steam or Battle.net could be responsible. If using Speedtest, consider checking your home network quality, age, and condition, as well as the distance between adapters, since greater distances usually cause slower performance.
Running a Cat 6 cable from the modem to the entrance suggests a fiber connection. Cat 6 works well up to about 325 feet. You might need certain tools to attach the RJ45 connectors. For basements, consider running the cable through the ceiling. This is just a recommendation. Good luck!
As you move farther from your router, the speeds won't match what you're promised. This image shows how WiFi weakens throughout your home.
These devices claim 500Mbps speeds but only utilize 100Mbps ports, meaning 100Mbps is the maximum achievable. If you're receiving 12Mbps (better than your current connection), it's probably due to distance between powerline units and wiring quality or interference inside your home. You have limited control over this issue. The best fix would be to install a cable, though that isn't feasible for everyone. Since improving powerline performance is difficult, the next step is to upgrade your wireless network for better coverage throughout the house.