F5F Stay Refreshed Hardware Desktop The PC isn't updating after installing additional RAM.

The PC isn't updating after installing additional RAM.

The PC isn't updating after installing additional RAM.

Pages (3): Previous 1 2 3 Next
G
ghostlydigger
Senior Member
500
03-05-2022, 11:08 AM
#11
No, I did not leave the default voltage.
G
ghostlydigger
03-05-2022, 11:08 AM #11

No, I did not leave the default voltage.

R
Rigar98
Member
61
03-10-2022, 12:45 AM
#12
The expo configuration was correct. There were no problems, and I didn't need to enter bios for any changes. I added an extra RAM module, and it started working immediately via expo.
R
Rigar98
03-10-2022, 12:45 AM #12

The expo configuration was correct. There were no problems, and I didn't need to enter bios for any changes. I added an extra RAM module, and it started working immediately via expo.

J
JureCar11
Junior Member
47
03-12-2022, 07:36 AM
#13
It's frustrating, isn't it? I'll give it another shot, but it might take some time. Each boot failure makes it harder to post in safe mode... I've tried before and it didn't work. I think just relying on guesswork won't help much here. There are many secondary timings and voltage settings to consider. Thanks for trying to assist, it means a lot. I really need a clear, logical approach to tackle this.
J
JureCar11
03-12-2022, 07:36 AM #13

It's frustrating, isn't it? I'll give it another shot, but it might take some time. Each boot failure makes it harder to post in safe mode... I've tried before and it didn't work. I think just relying on guesswork won't help much here. There are many secondary timings and voltage settings to consider. Thanks for trying to assist, it means a lot. I really need a clear, logical approach to tackle this.

D
drako_sky
Member
166
03-12-2022, 09:41 PM
#14
Having four DDR5 modules can either be smooth or cause issues. You might want to adjust EXPO timings and use a lower speed, such as 4600. I'm also using four modules myself, while the other four are slower and don't handle high speeds well.
D
drako_sky
03-12-2022, 09:41 PM #14

Having four DDR5 modules can either be smooth or cause issues. You might want to adjust EXPO timings and use a lower speed, such as 4600. I'm also using four modules myself, while the other four are slower and don't handle high speeds well.

D
digayo
Junior Member
44
03-18-2022, 06:47 PM
#15
I received my result. My processor can only handle up to 3600 MHz across four cores. For now, I’ll keep the 32 GB RAM.
D
digayo
03-18-2022, 06:47 PM #15

I received my result. My processor can only handle up to 3600 MHz across four cores. For now, I’ll keep the 32 GB RAM.

M
Mano_Guister
Member
60
03-19-2022, 07:58 PM
#16
I don't have a CPU, but I'm here to help with any questions you might have!
M
Mano_Guister
03-19-2022, 07:58 PM #16

I don't have a CPU, but I'm here to help with any questions you might have!

G
Gabokazu
Posting Freak
814
03-20-2022, 04:31 AM
#17
It seems you're considering using your current setup to achieve high performance. While it's challenging, it's achievable depending on various factors. I've heard from someone who runs a 6200 with four sticks, but I haven't tried it myself. I'm using a Zen 5 CPU and another machine with a Zen 4 is running well. It might just come down to luck.
G
Gabokazu
03-20-2022, 04:31 AM #17

It seems you're considering using your current setup to achieve high performance. While it's challenging, it's achievable depending on various factors. I've heard from someone who runs a 6200 with four sticks, but I haven't tried it myself. I'm using a Zen 5 CPU and another machine with a Zen 4 is running well. It might just come down to luck.

F
Fred10244
Posting Freak
937
03-21-2022, 06:32 PM
#18
It's an AMD Ryzen 7 7800X3D running at 4.2GHz. The maximum officially supported speed is 3200MHz for my processor. This isn't just chance—I didn’t know enough about CPU compatibility. It’s likely I can push a bit higher with some adjustments, but my goal was around 6000MHz, which is unrealistic. I took a close look at what I have in this PC and figured I don’t really need that much power. I mainly use it for gaming and 3D modeling. Unless the modeling becomes professional (unlikely), I won’t require more than 32GB. So I’ll stick with the new configuration and save the money for something else. Perhaps an AMD GPU later if I decide to switch from Windows to Linux.
F
Fred10244
03-21-2022, 06:32 PM #18

It's an AMD Ryzen 7 7800X3D running at 4.2GHz. The maximum officially supported speed is 3200MHz for my processor. This isn't just chance—I didn’t know enough about CPU compatibility. It’s likely I can push a bit higher with some adjustments, but my goal was around 6000MHz, which is unrealistic. I took a close look at what I have in this PC and figured I don’t really need that much power. I mainly use it for gaming and 3D modeling. Unless the modeling becomes professional (unlikely), I won’t require more than 32GB. So I’ll stick with the new configuration and save the money for something else. Perhaps an AMD GPU later if I decide to switch from Windows to Linux.

D
Dohndude
Member
186
03-21-2022, 07:15 PM
#19
I also own the 7800X3D. It's achievable. It might require 6000CL36 (or adjustments) or another board and BIOS (as of December 2024). My configuration is: BIOS Version/Date American Megatrends International, LLC. F32g, 12/19/2024 Onyx: Ryzen 7 7800X3D / Gigabyte B650 AORUS Pro AX / ASRock Taichi 7900xtx OC / G. Skill Flare X5 6000CL36 64GB (4x16GB) / Samsung 980 1TB x3 / Super Flower Leadex V Plat Pro 1000 / EK-AIO 360 Basic w/ Silent Wings fans / Fractal Design North XL (black mesh) / AOC AGON 35" 3440x1440 100Hz / Mackie CR5BT / SteelSeries Arctis Nova Pro / Cherry MX Board 3.0 / Logitech G502 - https://valid.x86.fr/my9nnr
D
Dohndude
03-21-2022, 07:15 PM #19

I also own the 7800X3D. It's achievable. It might require 6000CL36 (or adjustments) or another board and BIOS (as of December 2024). My configuration is: BIOS Version/Date American Megatrends International, LLC. F32g, 12/19/2024 Onyx: Ryzen 7 7800X3D / Gigabyte B650 AORUS Pro AX / ASRock Taichi 7900xtx OC / G. Skill Flare X5 6000CL36 64GB (4x16GB) / Samsung 980 1TB x3 / Super Flower Leadex V Plat Pro 1000 / EK-AIO 360 Basic w/ Silent Wings fans / Fractal Design North XL (black mesh) / AOC AGON 35" 3440x1440 100Hz / Mackie CR5BT / SteelSeries Arctis Nova Pro / Cherry MX Board 3.0 / Logitech G502 - https://valid.x86.fr/my9nnr

R
Rainbowiii
Member
64
03-28-2022, 01:54 AM
#20
I have the most recent updates on my system. I think it’s possible, but it wouldn’t be worth the effort right now.
R
Rainbowiii
03-28-2022, 01:54 AM #20

I have the most recent updates on my system. I think it’s possible, but it wouldn’t be worth the effort right now.

Pages (3): Previous 1 2 3 Next