The PC isn't able to install Windows 11 despite having suitable hardware and correct BIOS configurations.
The PC isn't able to install Windows 11 despite having suitable hardware and correct BIOS configurations.
I'm attempting to set up Windows 11 on my newly assembled gaming PC. The system has 16GB RAM, an Intel i7 processor, a 2TB M.2 drive, a 3060 graphics card, and an ASUS Prime motherboard that claims compatibility with Windows 11. All components are recognized correctly. I believe the hardware is configured properly. Despite this, installation fails even after entering the product key; the system displays a message stating it cannot run Windows 11 Pro. I suspect a BIOS adjustment might be necessary, as the motherboard advertises Windows 11 readiness. There are several settings in the UEFI BIOS that could affect compatibility—some should remain enabled or defaulted. I’m considering resetting the BIOS to its original configuration to test if that resolves the issue. The BIOS documentation mentions Windows 11-compatible options were active during startup, which might explain the problem. I’m still unsure about the exact settings required.
Regarding the flash drive used as a boot drive, it could be in the BIOS settings or something else. I'm not entirely sure about the exact location yet. You might need to verify it again.
they meant the M.2 drive. start by downloading the AHCI/RAID drivers, save them into a folder, then copy that folder onto the installation USB. when choosing the install disk, pick "load drivers" and locate the files there. remove all existing partitions and use the remaining one for installation.
It seems the setup needs adjustments. Try using the installation USB, boot from it. At the "install windows" screen, press Shift+f10 to open the command prompt. Enter "DISKPART" to launch diskpart. Type "list disk" to see your installed drives. If you have just one m.2 drive, it should display a single disk labeled "disk 0". Let me know if this works for you.