The PC is powered on yet there is no screen visible!
The PC is powered on yet there is no screen visible!
My computer powers on and all components function properly, yet no videos appear. I've reset everything without success. Additionally, I observed two white LEDs on the motherboard near my RAM sticks, along with a white light on the EZ debug LED for VGA that turns on and then off. What's causing the display issue? Also, my motherboard is an MSI MPG Z390 gaming edge AC, paired with an i9-9700K CPU and an EVGA GeForce RTX 2070 GPU.
consider trying the GPU on another system if possible
update the BIOS of your motherboard and attempt to use the 2070 again
the wattage matches your system requirements, but the PSU might be defective and unable to provide sufficient power for the GPU
are you connecting the cables from this particular PSU or using different ones? Verify the pin connections, as some may not be properly seated
avoid using the Y-cable to connect both connectors to the GPU; instead, use two separate PCIe cables
I’m working with a Corsair CX650F RGB that has a 650w rating and an 80+ bronze certification, all connected to the GPU. I’ve attempted to link the monitor directly to the motherboard but it hasn’t worked, especially with my 240hz Samsung Odyssey. I think I’ll try connecting it through the GPU instead.
Hey there, I've faced the same problem before too. Fans spinning and RGB activated, but no display at all. Initially, I assumed it was an HDMI or graphics card issue, but it turns out the power supply is the real culprit. Just make sure the new PSU matches your system's requirements—don't forget that!
Oh okay thx yea I was thinking either ram or psu(not enough wattage but wasn’t sure. Gonna try turning on without GPU if not gonna buy a better psu. Thank you
Which power supply are you connecting to the 2070? Which monitor are you using? How did you link it to the 2070?
I'm not entirely confident about this. I thought about trying a different graphics card, but that would be very time-consuming. Honestly, I'm still unsure. My main suspicion seems to be the power supply.
consider trying the GPU on another system if possible
update the BIOS of your motherboard and attempt to run the 2070 again
the wattage matches your system requirements, but the PSU might be defective and unable to provide sufficient power for the GPU
are you connecting the cables from this particular PSU or using different ones? Verify the pin connections, as some may not be properly seated
avoid using the Y-cable to connect both connectors to the GPU; instead, use two separate PCIe cables