F5F Stay Refreshed Hardware Desktop The PC is no longer starting properly.

The PC is no longer starting properly.

The PC is no longer starting properly.

V
Victoryeagle77
Junior Member
47
01-20-2019, 02:33 AM
#1
Hey everyone! The issue began when a hard drive stopped working properly at a connection point, leading to water spraying onto the front of the case and some distilled water getting onto the components. I shut it off before any issues arose, but the system managed to restart itself before I could cut power. After drying it out and removing the faulty drive, I restored everything and turned it on. It booted normally, showing the boot beep and logo screen, but then started flashing a pattern of dashes in the top left corner. You can watch a video of this here via the Reddit link provided. Later, it entered the BIOS menu, displaying both my RAM and drives, with one drive already having Windows installed. I’ve attached some photos of the BIOS for reference. I’m unsure what to do next since I don’t have any spare parts available for testing. Please help me out. Also, note that after drying, the screen displayed a message saying the BIOS was reset. My build includes a GIGABYTE X570 AORUS PRO WiFi AMD Ryzen 7 3800X, a 1000W 80+ Gold certified system with a fully modular design. The motherboard is from RM1000x, and I have a Samsung 970 Evo M.2-2280 NVME SSD for the drive bay.
V
Victoryeagle77
01-20-2019, 02:33 AM #1

Hey everyone! The issue began when a hard drive stopped working properly at a connection point, leading to water spraying onto the front of the case and some distilled water getting onto the components. I shut it off before any issues arose, but the system managed to restart itself before I could cut power. After drying it out and removing the faulty drive, I restored everything and turned it on. It booted normally, showing the boot beep and logo screen, but then started flashing a pattern of dashes in the top left corner. You can watch a video of this here via the Reddit link provided. Later, it entered the BIOS menu, displaying both my RAM and drives, with one drive already having Windows installed. I’ve attached some photos of the BIOS for reference. I’m unsure what to do next since I don’t have any spare parts available for testing. Please help me out. Also, note that after drying, the screen displayed a message saying the BIOS was reset. My build includes a GIGABYTE X570 AORUS PRO WiFi AMD Ryzen 7 3800X, a 1000W 80+ Gold certified system with a fully modular design. The motherboard is from RM1000x, and I have a Samsung 970 Evo M.2-2280 NVME SSD for the drive bay.

N
Nani100
Member
213
01-20-2019, 09:28 AM
#2
You activated CSM for old bootloader choices. It could explain why the drive isn’t shown in boot devices. Afterwards, double-check that the Windows Boot Manager device appears first.
N
Nani100
01-20-2019, 09:28 AM #2

You activated CSM for old bootloader choices. It could explain why the drive isn’t shown in boot devices. Afterwards, double-check that the Windows Boot Manager device appears first.

E
EuropeanUnion
Senior Member
700
01-20-2019, 04:40 PM
#3
I noticed you didn't include details about the initial boot message. When I first turned it on after drying, the screen displayed a BIOS reset notice. I'll note this and check if it resolves the issue.
E
EuropeanUnion
01-20-2019, 04:40 PM #3

I noticed you didn't include details about the initial boot message. When I first turned it on after drying, the screen displayed a BIOS reset notice. I'll note this and check if it resolves the issue.

I
Ipod984
Senior Member
707
01-25-2019, 09:41 AM
#4
Before shutting down CSM, it emitted a three-beat beep twice before reaching the logo screen. Once turned off, it skipped the beep sequence and transitioned straight from the boot screen to the BIOS without any flashing lights.
I
Ipod984
01-25-2019, 09:41 AM #4

Before shutting down CSM, it emitted a three-beat beep twice before reaching the logo screen. Once turned off, it skipped the beep sequence and transitioned straight from the boot screen to the BIOS without any flashing lights.

M
maxharp
Member
51
01-26-2019, 10:25 AM
#5
Yes, I set the boot sequence to have Windows Boot Manager first.
M
maxharp
01-26-2019, 10:25 AM #5

Yes, I set the boot sequence to have Windows Boot Manager first.

B
BroZone13
Junior Member
13
01-26-2019, 05:01 PM
#6
I did.
B
BroZone13
01-26-2019, 05:01 PM #6

I did.

C
ChristobalMC_
Member
102
01-26-2019, 07:27 PM
#7
I found my Windows thumb drive, installed it, and started the setup. The installer took me to the installation or repair screen. When I attempted a repair, it reported an error and returned to the options menu. Then I tried reinstalling, but it said another Windows version was already present. I plan to remove the M.2 drive and test it further, possibly installing on another drive instead.
C
ChristobalMC_
01-26-2019, 07:27 PM #7

I found my Windows thumb drive, installed it, and started the setup. The installer took me to the installation or repair screen. When I attempted a repair, it reported an error and returned to the options menu. Then I tried reinstalling, but it said another Windows version was already present. I plan to remove the M.2 drive and test it further, possibly installing on another drive instead.

H
Hagnarock
Senior Member
434
01-29-2019, 07:22 AM
#8
I successfully set up Windows on the additional storage, but I’m still able to reach my previous drive and retain all my files, even the old Windows installation. It’s unclear why I can’t boot from the M.2, but thank you for your assistance—it really helped!
H
Hagnarock
01-29-2019, 07:22 AM #8

I successfully set up Windows on the additional storage, but I’m still able to reach my previous drive and retain all my files, even the old Windows installation. It’s unclear why I can’t boot from the M.2, but thank you for your assistance—it really helped!