The overclocking process continues to reduce performance and cause overheating.
The overclocking process continues to reduce performance and cause overheating.
I increased the CPU speed to 4.3 Ghz and then to 4.6 Ghz, maintaining stable temperatures around 55°C on the higher frequency. Despite this, the CPU continued throttling at these lower temperatures. After extensive research online, I identified the VRM as the likely culprit. To test further, I opened my PC case and used a standard room fan to circulate air over the MOSFET heat sinks. No throttling was observed, confirming the issue is with the VRM. I’m seeking advice on ways to improve cooling for the VRM without replacing the motherboard. Any suggestions would be appreciated.
A few good top fans would be effective. Pair a couple of Coolermaster Jetflo fans and install them at the top of the case, directing airflow inside. It's also wise to purchase some filters for these fans.
A few good top fans would be effective. Install a couple of Coolermaster Jetflo fans at the top of the case, pushing them down into it. It's also a good idea to purchase some filters for these fans.
Get better MB with a more powerful VRM and a cooler on it. This one won't allow you to reach the high OC level!
J0 N3SB0 :
Mr Kagouris :
A few good quality top fans can handle this job. Install a pair of Coolermaster Jetflo fans at the top of the case, directing them downward into the case. I also suggest purchasing a couple of filters for these fans.
How do you attach them to the case?
The fans are simply screwed into the mounting slots (your case has two top slots). You should be able to take off the top panel and secure them using the provided screws.
Regarding the filters, I recommend Silverstone FF123s. Attach them to the fans but on the side that faces inside the case. They are magnetic, but you'll need screws because the fans are made of plastic. This makes cleaning them much easier.