The NVIDIA 4070 Super frequently alters its resolution and continues to modify the main display.
The NVIDIA 4070 Super frequently alters its resolution and continues to modify the main display.
The setup is fluctuating with the primary display selection. Three screens are connected, as shown in the attached files. Screen 1 and 2 function as 4K displays, while Screen 3 operates at 1920x1080 at 60Hz. It seems Screen 1 and 2 automatically switch the main display without any manual input. Changing the connection ports doesn't resolve the issue—Display 1 still boots on Display 2, and vice versa. When I restart the system, it tries to set up the displays again, but it keeps cycling between them. Some games launch in windowed mode on Screen 1 and fullscreen on Screen 2. The only solution I've tried is rebooting twice and then turning on the other two screens, which eventually makes Screen 1 the active display regardless of plug configuration. This causes frequent resizing and misalignment across my desktop. It appears that older hardware or software limitations might be at play, making it hard to maintain a stable setup. I’m still trying to figure out how to get a consistent experience without manual adjustments.
Checked if drivers were installed for all monitors and verified the latest firmware versions. Links provided for support pages.
It seems the setup didn't quite align as expected. The interface keeps showing different layouts between "1" and "2," even though "1" is marked as primary. It looks like there might be an issue with the drivers or configuration. Maybe a tech expert or authority would help resolve this.