F5F Stay Refreshed Hardware Desktop The newly installed RAM modules aren't working.

The newly installed RAM modules aren't working.

The newly installed RAM modules aren't working.

Pages (3): Previous 1 2 3 Next
L
Lukrinq
Junior Member
17
09-21-2022, 10:42 PM
#11
It didn’t resolve the problem. The fans are still active, and there’s a faint beep you can barely notice. Plus, the drive feels more responsive now.
L
Lukrinq
09-21-2022, 10:42 PM #11

It didn’t resolve the problem. The fans are still active, and there’s a faint beep you can barely notice. Plus, the drive feels more responsive now.

M
moleman1203
Member
124
09-22-2022, 12:26 AM
#12
This indicates the device has power and is attempting to start. Allow a few minutes for the initial boot using new hardware; a test called POST will run and may not display results until completion. If it takes longer than five minutes, there may be an issue. Consider booting with only one RAM stick if that resolves the problem, then restart and reinsert the remaining sticks.
M
moleman1203
09-22-2022, 12:26 AM #12

This indicates the device has power and is attempting to start. Allow a few minutes for the initial boot using new hardware; a test called POST will run and may not display results until completion. If it takes longer than five minutes, there may be an issue. Consider booting with only one RAM stick if that resolves the problem, then restart and reinsert the remaining sticks.

X
xxxLazersxxx
Member
117
09-23-2022, 08:16 PM
#13
Attempted to start using just a single RAM stick.
X
xxxLazersxxx
09-23-2022, 08:16 PM #13

Attempted to start using just a single RAM stick.

J
jjgrow12
Junior Member
46
09-24-2022, 04:17 AM
#14
It might just mean the RAM isn't fully seated. Even if it seems to, they may not be connecting properly across all pins.
J
jjgrow12
09-24-2022, 04:17 AM #14

It might just mean the RAM isn't fully seated. Even if it seems to, they may not be connecting properly across all pins.

T
thiagogastal27
Member
53
09-24-2022, 11:10 AM
#15
I verified and the cards are perfectly placed.
T
thiagogastal27
09-24-2022, 11:10 AM #15

I verified and the cards are perfectly placed.

B
BobNeedsYou
Member
53
09-28-2022, 06:49 AM
#16
It keeps restarting repeatedly without a full boot. It works for roughly 30 seconds before shutting down and then turning back on.
B
BobNeedsYou
09-28-2022, 06:49 AM #16

It keeps restarting repeatedly without a full boot. It works for roughly 30 seconds before shutting down and then turning back on.

N
NoaTsu
Junior Member
3
09-28-2022, 01:29 PM
#17
You should reset the CMOS each time you modify your cards.
N
NoaTsu
09-28-2022, 01:29 PM #17

You should reset the CMOS each time you modify your cards.

S
SLENDERROCK
Junior Member
6
09-29-2022, 09:37 AM
#18
With a single stick or multiple sticks?
S
SLENDERROCK
09-29-2022, 09:37 AM #18

With a single stick or multiple sticks?

B
BosnaKingz
Member
166
09-29-2022, 04:19 PM
#19
Yes, the CMOS remains powered off after shutdown.
B
BosnaKingz
09-29-2022, 04:19 PM #19

Yes, the CMOS remains powered off after shutdown.

9
992x
Senior Member
506
10-21-2022, 08:22 AM
#20
Two, four, and one...
9
992x
10-21-2022, 08:22 AM #20

Two, four, and one...

Pages (3): Previous 1 2 3 Next