The newly built device functioned properly at first, but currently it shows no display.
The newly built device functioned properly at first, but currently it shows no display.
Thank you for clarifying how to and offering a BIOS update video to assist peace712 in updating their BIOS if needed.
Once you've verified the BIOS was successfully flashed, clearing the CMOS is a good idea, if you haven't.
Any recommendation for PSU? I will add couple more HDDs, a Blu-ray R/W. No plan on adding graphics card at this time.
Where are you located? What is your budget for your PSU purchase? What is your preferred site for purchase? Please elaborate on
couple
. It doesn't affect power draw, only the number of connectors you need off the PSU's harness.
New York, no local shops around. So the purchase must be online. Every component for this project was bought from NewEgg and Amazon.
I’m budgeting 100-120 but could stretch a bit if it helps.
After upgrading PSU, the only part left from the previous build is the chassis. I might consider replacing it with a new one, rebuilding the old setup, and using it as a NAS or media server... 😂
You might obtain this from the link provided;
https://pcpartpicker.com/product/sq...ul...ry-ii-850w
when aiming to install an RTX 5070 Ti or RX 9070 XT. If not, consider a lower wattage option.
For a case, check this:
https://pcpartpicker.com/product/39vscf/...cross-atxb
You can find more details here: https://www.youtube.com/watch?v=j7DBH2wq9kA
Make sure to mention the drives you plan to fit inside and whether a compact discrete GPU would be better suited for your needs.