F5F Stay Refreshed Hardware Desktop The new R5 3600 requires a single RAM stick to power up.

The new R5 3600 requires a single RAM stick to power up.

The new R5 3600 requires a single RAM stick to power up.

L
LiuvliZ_YT
Junior Member
12
11-23-2019, 07:31 AM
#1
I've been using an R5 1600 with an Asrock X370 killer SLI/Ac setup and 4x4GB 2400 Ballistix sport RAM for several years. Recently, I upgraded to a 3600 but only got one stick installed at a time. I've tried all four sticks across the four slots, and they function properly when only one is active. I've also cleared the CMOS multiple times without success. The fans spin and then suddenly stop, after which everything restarts.
L
LiuvliZ_YT
11-23-2019, 07:31 AM #1

I've been using an R5 1600 with an Asrock X370 killer SLI/Ac setup and 4x4GB 2400 Ballistix sport RAM for several years. Recently, I upgraded to a 3600 but only got one stick installed at a time. I've tried all four sticks across the four slots, and they function properly when only one is active. I've also cleared the CMOS multiple times without success. The fans spin and then suddenly stop, after which everything restarts.

C
Crypso
Junior Member
8
11-24-2019, 07:08 PM
#2
Sure, I'm here to assist! What do you need help with?
C
Crypso
11-24-2019, 07:08 PM #2

Sure, I'm here to assist! What do you need help with?

D
DexoLag
Member
128
11-27-2019, 04:55 PM
#3
Could it start using all four RAM modules and retain the 1600 MHz speed? If yes, it might be a faulty BIOS—there should be an older version that supports the 3600 MHz that you could reinstall.
D
DexoLag
11-27-2019, 04:55 PM #3

Could it start using all four RAM modules and retain the 1600 MHz speed? If yes, it might be a faulty BIOS—there should be an older version that supports the 3600 MHz that you could reinstall.

A
AdelVafin
Junior Member
5
11-29-2019, 04:20 AM
#4
I haven't tested the 1600 yet, though it functioned with an earlier model that also supported the 3600. Both faced the same issue with a single RAM stick. I might consider trying another previous version.
A
AdelVafin
11-29-2019, 04:20 AM #4

I haven't tested the 1600 yet, though it functioned with an earlier model that also supported the 3600. Both faced the same issue with a single RAM stick. I might consider trying another previous version.

F
FlameBoyBoom
Member
55
12-04-2019, 05:21 AM
#5
Did you pull the CMOS long enough to clear the *anything* tied to the 1600?
F
FlameBoyBoom
12-04-2019, 05:21 AM #5

Did you pull the CMOS long enough to clear the *anything* tied to the 1600?

S
SmileyFishMC
Member
60
12-13-2019, 10:07 PM
#6
I've tested the jumper and removed the battery. I pulled the battery but got sidetracked, leaving it out for about an hour.
S
SmileyFishMC
12-13-2019, 10:07 PM #6

I've tested the jumper and removed the battery. I pulled the battery but got sidetracked, leaving it out for about an hour.

M
MasterBB8
Junior Member
32
12-29-2019, 10:11 AM
#7
Some BIOS updates aren't helpful. I plan to check both CPU versions for each BIOS release to gather more information.
M
MasterBB8
12-29-2019, 10:11 AM #7

Some BIOS updates aren't helpful. I plan to check both CPU versions for each BIOS release to gather more information.

O
Oscar_skilzz
Junior Member
21
12-30-2019, 08:38 PM
#8
The 1600 has been compatible with all BIOS versions, but I haven’t tried the newest one. I only tested the 3600, which failed with more than one RAM stick using another BIOS.
O
Oscar_skilzz
12-30-2019, 08:38 PM #8

The 1600 has been compatible with all BIOS versions, but I haven’t tried the newest one. I only tested the 3600, which failed with more than one RAM stick using another BIOS.