F5F Stay Refreshed Hardware Desktop The new installation fails to start with dual-channel RAM added.

The new installation fails to start with dual-channel RAM added.

The new installation fails to start with dual-channel RAM added.

Pages (2): 1 2 Next
J
JU5T_M4X
Member
113
05-26-2022, 03:43 AM
#1
Chose to treat myself by assembling a high-end PC. Components include an i9-13900K ASRock Z790 TAICHI Intel LGA1700 EATX motherboard, four DDR5 EVGA SuperNOVA 1300 GT sticks from GIGABYTE, a GeForce RTX 4090 with 24GB GDDR6X, four CORSAIR Vengeance RGB 32GB modules (two 16GB), PC RAM DDR5 7200 with PC5 at 57600, a 288-pin 32GB RAM module, and a WDS200T2X0E SSD. Installed everything. All four RAM modules are functioning, but the system boots with codes 00 C0 15 12 28 7F 19. If only RAM in B1/B2, it boots into BIOS single-channel. Updated BIOS to version 6.04. Still puzzled about the problem.
J
JU5T_M4X
05-26-2022, 03:43 AM #1

Chose to treat myself by assembling a high-end PC. Components include an i9-13900K ASRock Z790 TAICHI Intel LGA1700 EATX motherboard, four DDR5 EVGA SuperNOVA 1300 GT sticks from GIGABYTE, a GeForce RTX 4090 with 24GB GDDR6X, four CORSAIR Vengeance RGB 32GB modules (two 16GB), PC RAM DDR5 7200 with PC5 at 57600, a 288-pin 32GB RAM module, and a WDS200T2X0E SSD. Installed everything. All four RAM modules are functioning, but the system boots with codes 00 C0 15 12 28 7F 19. If only RAM in B1/B2, it boots into BIOS single-channel. Updated BIOS to version 6.04. Still puzzled about the problem.

P
Pieftw247
Member
201
05-26-2022, 07:01 AM
#2
It wouldn't be unexpected. The issue could stem from a faulty CPU mount, cooler mount, motherboard, or CPU itself. I'd try reseating the CPU and cooler first, then reach out to ASRock for a potential return or replacement.
P
Pieftw247
05-26-2022, 07:01 AM #2

It wouldn't be unexpected. The issue could stem from a faulty CPU mount, cooler mount, motherboard, or CPU itself. I'd try reseating the CPU and cooler first, then reach out to ASRock for a potential return or replacement.

B
Bartekdwarf
Posting Freak
791
05-26-2022, 07:06 AM
#3
I've attempted to reinstall the CPU and adjusted the cooler's tightness (H150I Elite LCD).
B
Bartekdwarf
05-26-2022, 07:06 AM #3

I've attempted to reinstall the CPU and adjusted the cooler's tightness (H150I Elite LCD).

P
poliitik
Junior Member
5
05-26-2022, 07:11 AM
#4
It might be a faulty controller in the CPU.
P
poliitik
05-26-2022, 07:11 AM #4

It might be a faulty controller in the CPU.

P
Pyrophorion
Member
197
06-02-2022, 10:35 AM
#5
That's when it's time to begin gathering and swapping components. I'd begin with the motherboard, as it's the most likely to fail, though the CPU could also be an issue.
P
Pyrophorion
06-02-2022, 10:35 AM #5

That's when it's time to begin gathering and swapping components. I'd begin with the motherboard, as it's the most likely to fail, though the CPU could also be an issue.

_
_ThaKing
Member
58
06-03-2022, 11:18 AM
#6
It looks like a limited CPU memory controller, common in early and mid-generation designs. X99 faced similar issues with DDR4, but improvements came with Skylake chips. More recent X99 models and boards now perform better.
_
_ThaKing
06-03-2022, 11:18 AM #6

It looks like a limited CPU memory controller, common in early and mid-generation designs. X99 faced similar issues with DDR4, but improvements came with Skylake chips. More recent X99 models and boards now perform better.

A
Audi_Sport
Member
54
06-04-2022, 11:22 PM
#7
This description refers to two kits containing two sticks each, but it’s not ideal since identical models can vary slightly. QVL applies only to one kit where all sticks are verified as the same batch. Despite testing both at once, inconsistencies remain.
A
Audi_Sport
06-04-2022, 11:22 PM #7

This description refers to two kits containing two sticks each, but it’s not ideal since identical models can vary slightly. QVL applies only to one kit where all sticks are verified as the same batch. Despite testing both at once, inconsistencies remain.

W
WPaige
Senior Member
377
06-25-2022, 07:27 PM
#8
It's highly unlikely you can boot with DDR5-7200 when all four DIMMs are full. If the system didn't start after trying A1 and A2 without B1 and B2, it probably indicates a hardware issue. The CPU might not be the problem, but it's still possible until confirmed otherwise.
W
WPaige
06-25-2022, 07:27 PM #8

It's highly unlikely you can boot with DDR5-7200 when all four DIMMs are full. If the system didn't start after trying A1 and A2 without B1 and B2, it probably indicates a hardware issue. The CPU might not be the problem, but it's still possible until confirmed otherwise.

F
Frinex10
Posting Freak
806
06-26-2022, 10:30 PM
#9
Total amount is 4 sticks weighing 16 grams each.
F
Frinex10
06-26-2022, 10:30 PM #9

Total amount is 4 sticks weighing 16 grams each.

G
GummyGod1
Junior Member
18
06-28-2022, 10:56 PM
#10
It’s possible you misinterpreted the instructions, but why would four pieces not fit?
G
GummyGod1
06-28-2022, 10:56 PM #10

It’s possible you misinterpreted the instructions, but why would four pieces not fit?

Pages (2): 1 2 Next