The new computer functions properly but sometimes fails to power up completely
The new computer functions properly but sometimes fails to power up completely
Hey, this seems odd. The computer runs normally now but sometimes it won’t power back on at night. There’s no lights or fan noise, which suggests the power supply might be failing. After leaving it unplugged for a while, moving the case slightly and plugging it elsewhere fixed the issue. When I put it back in its original spot, it works again. It’s possible the lifting helped, but it seems to work twice already. What could be happening with this setup?
You might be dealing with a faulty power supply or a simple issue like a damaged power cable. If it functions occasionally with both outlets and no device causes this problem, it could be one of the first two I mentioned at the start. Also, try reconnecting all the power cables in the PSU/motherboard connector.
I omitted to note, however, I attempted a longer cable that connects to the alternate port, but it remains stuck without opening the case.
It seems your PSU might have caused a short on your motherboard. Have you used the PSU before? Which brand do you think it came from? You could also attempt powercycling by turning it on and off three times consecutively using the switch on the back.
I think PSU might be the issue too. It could be that a different socket and a longer cable prevented you from unplugging the power supply for an extended period, which might have caused it to stop working. Just try using the longer cable next time and see if the problem persists. Unplugging the system briefly while moving your PC could help it restart properly. Based on what I've seen so far, the PSU seems to be the likely culprit.
It restarts the system completely. This can help fix issues or refresh the device.
It might have helped to mention that the key was after several hours of leaving the PC completely off. While I was inspecting the longer cable before lifting the case, my main goal was to reset the CMOS, which actually worked before I made any changes.