The motherboard isn't turning on even though the Q-Flash is installed.
The motherboard isn't turning on even though the Q-Flash is installed.
So in that picture from left to right, it's VSS(ground) missing, MB_DATA(part of the DRAM Bus), VSS and then MB_DQS, MB_DATA. And yes, the other is a IGPU pin. I'd expect the CPU to want to work, just with no channel B for ram. Do you still have the pins that fell off or no? Since the power supply is out and on it's own, do you have a molex fan or two you can hook up to it? Run the old paperclip test and make sure it stays on. https://help.corsair.com/hc/en-us/articl...pply-Unit-
Sorry to hear about the missing pins. I've included additional photos showing two more missing "Greenish" pins in the lower right corner and a bit of thermal goo near the CPU. It seems connected to the GPIO area—anything there could affect functionality.
I checked the PSU connected to the 4th and 5th pins of the 24-pin cable...this was done to evaluate the GPU setup. It remains operational for a long time, appearing stable.
I'm concerned about the CPU damage on the PCB corners. I'll message you soon about it. Without the pins and a soldering iron, it's hard to tell if it can be fixed.