The Memory Context Restore feature isn't functioning properly.
The Memory Context Restore feature isn't functioning properly.
I don’t know exactly when it began, maybe since I first set up the computer. The Memory Context Restore on my ASRock board doesn’t appear to function properly—it usually takes around five minutes or more for the RAM to reset every time I power off the machine. I’ve tried not to shut down the PC for weeks to prevent long boot times, but it still causes delays. The system runs normally otherwise, though changing the BIOS settings hasn’t helped. Right now I’m experimenting with the DOCP configuration to see if it makes a difference, but I’m still puzzled by the issue.
Test with MCR active but memory not configured for DOCP/XMP—check if boot time gets faster. Adjust timings and voltage manually for your RAM rather than relying on DOCP. Sometimes DOCP introduces extra delays that stop MCR from saving correctly. Reset CMOS and rebuild BIOS settings from the ground up; MCR might get confused if you’ve changed profiles often. If problems persist, it could be a limitation of your board and RAM combination. In the meantime, turn on Fast Boot to reduce a few seconds, though it won’t fix the retraining issue entirely.
Sure, let's break this down. Could you share more specifics? What processor are you running? Which ASRock motherboard model is it? Also, which RAM module do you have—what exact part numbers are you using? Knowing the number of slots and their configuration would help us narrow it down further.
We can make educated assumptions based on your description, but having these details will speed things up. It sounds like you might be dealing with a BIOS issue; perhaps an older revision caused the problem, and you're considering updating to a newer one. Your boot times suggest either ample RAM or a very basic BIOS—full memory training shouldn’t take more than about two minutes on modern systems.