The issue with my motherboard overheating needs attention.
The issue with my motherboard overheating needs attention.
C&Q is designed to avoid that, don't turn it off.
Certain appropriately sized chip coolers can assist as well.
Links: https://www.amazon.com/Self-Adhesive-Alu...B0737B1LH8
https://www.amazon.com/Easycargo-Ra...MQC8RF6511V&psc=1&refRID=1NBVXFGH8MQC8RF6511V
I understand. You plan to check at a nearby store, but they mentioned it's acceptable below 80°C. However, your motherboard seems to behave differently, showing issues between 63-70°C.
In reality, VRM can endure temperatures above 100°C, though enhanced cooling could extend its lifespan.
Likely not a significant increase, it remains unable to provide more power than its original design allowed.
It might still cause an issue with a weak VRM setup. For such an outdated motherboard, the most sensible approach is to stay cautious. Since this board is affordable and the improvements won't be significant—particularly for gaming—it's about finding ways to adapt it without overcommitting.
My motherboard's support for CPU reaches up to 125W, though I'm not sure about the exact model. When the temperatures are optimal, it can fully utilize my CPU, so I plan to add some heatsinks in the future to see if it improves performance, at least slightly.
The support only means it works together functionally, not that it's a wise choice. We frequently face issues with budget AM3+ boards that claim to support 125W CPUs, causing throttling even at default settings and leading to premature failure. I wouldn't suggest using such a board for running a 125W CPU or overclocking. It's up to you to decide your hardware and the risks involved.