F5F Stay Refreshed Hardware Desktop The issue occurs exclusively when using OCCT.

The issue occurs exclusively when using OCCT.

The issue occurs exclusively when using OCCT.

Pages (2): 1 2 Next
B
bjabah
Junior Member
29
06-03-2021, 04:24 PM
#1
My setup includes an I5-11400 with 32GB Patriot Viper 3200MHz RAM, Coolermaster MWV v2 230V 650W bronze, Rtx 3070, ASUS TUF H510M-S2H. I performed a stress test and everything functioned normally except for the monitor flickering black briefly before recovering. I ran OCCT on power testing but it crashed after three minutes with BSOD. I also tried Prime95 under full load and Superposition GPU stress test at 100% power, both completed without issues for ten minutes. Played Marvel Rivals for about five matches without any problems. It seems the issue might be related to OCCT or possibly a slowdown in my system over time. The voltages are spreading well, with GPUs and CPUs getting stable 12V while lower components maintain 5V. What might be causing this?
B
bjabah
06-03-2021, 04:24 PM #1

My setup includes an I5-11400 with 32GB Patriot Viper 3200MHz RAM, Coolermaster MWV v2 230V 650W bronze, Rtx 3070, ASUS TUF H510M-S2H. I performed a stress test and everything functioned normally except for the monitor flickering black briefly before recovering. I ran OCCT on power testing but it crashed after three minutes with BSOD. I also tried Prime95 under full load and Superposition GPU stress test at 100% power, both completed without issues for ten minutes. Played Marvel Rivals for about five matches without any problems. It seems the issue might be related to OCCT or possibly a slowdown in my system over time. The voltages are spreading well, with GPUs and CPUs getting stable 12V while lower components maintain 5V. What might be causing this?

A
acewild952
Member
60
06-04-2021, 01:58 AM
#2
During these tests, you monitor voltages, temperatures, and other parameters to identify any unusual patterns, such as rising heat near the end of operation before a system failure.
A
acewild952
06-04-2021, 01:58 AM #2

During these tests, you monitor voltages, temperatures, and other parameters to identify any unusual patterns, such as rising heat near the end of operation before a system failure.

N
Nynhow
Member
199
06-04-2021, 03:19 AM
#3
I monitored the temperatures closely, CPU reaching a peak of 77 and GPU at 80. Voltages stayed optimal for both, with the GPU drawing 237W and the CPU using 135W.
N
Nynhow
06-04-2021, 03:19 AM #3

I monitored the temperatures closely, CPU reaching a peak of 77 and GPU at 80. Voltages stayed optimal for both, with the GPU drawing 237W and the CPU using 135W.

_
_RedStar
Member
171
06-09-2021, 01:32 PM
#4
Have you explored Cinebench for CPU? It seems CPU usage might be more challenging than with a multi-core test.
_
_RedStar
06-09-2021, 01:32 PM #4

Have you explored Cinebench for CPU? It seems CPU usage might be more challenging than with a multi-core test.

P
peppamax
Junior Member
3
06-10-2021, 06:42 AM
#5
I'll give it a shot when I'm back home and will tell you the result. I recall testing it two years ago or last year just to check how much heat the CPU generated, but it didn't cause any issues then.
P
peppamax
06-10-2021, 06:42 AM #5

I'll give it a shot when I'm back home and will tell you the result. I recall testing it two years ago or last year just to check how much heat the CPU generated, but it didn't cause any issues then.

_
_Killexx_
Member
104
06-10-2021, 07:06 AM
#6
It might be the motherboard VRMs getting too hot causing CPU problems, or the PSU affecting the GPU. The RTX 30-series often had temporary spikes that were resolved by updating drivers.
_
_Killexx_
06-10-2021, 07:06 AM #6

It might be the motherboard VRMs getting too hot causing CPU problems, or the PSU affecting the GPU. The RTX 30-series often had temporary spikes that were resolved by updating drivers.

P
pocio77
Posting Freak
783
06-19-2021, 01:59 AM
#7
The motherboard temperature stays under 25°C according to the specs, and the tests this time showed normal behavior. The CPU reached 85°C and throttled once, while superposition worked fine. Power usage was slightly higher at 142, but the GPU remained stable around 237-240. No crashes detected—you're in good shape.
P
pocio77
06-19-2021, 01:59 AM #7

The motherboard temperature stays under 25°C according to the specs, and the tests this time showed normal behavior. The CPU reached 85°C and throttled once, while superposition worked fine. Power usage was slightly higher at 142, but the GPU remained stable around 237-240. No crashes detected—you're in good shape.

R
Rooklood
Junior Member
3
06-19-2021, 04:27 AM
#8
These aren't VRM readings. Was the throttling limited to just one instance? It doesn’t seem too alarming. What exactly are the specifications? Wouldn’t it be better to rely on a popular and trusted sensor setup? https://www.hwinfo.com/
R
Rooklood
06-19-2021, 04:27 AM #8

These aren't VRM readings. Was the throttling limited to just one instance? It doesn’t seem too alarming. What exactly are the specifications? Wouldn’t it be better to rely on a popular and trusted sensor setup? https://www.hwinfo.com/

K
Katyson
Junior Member
2
06-24-2021, 12:34 PM
#9
Hwinfo displays identical CPU temperatures, just a single instance. There were no other events beyond the one throttle; I contacted my brother to test CPU- and GPU-heavy games and asked for an update.
K
Katyson
06-24-2021, 12:34 PM #9

Hwinfo displays identical CPU temperatures, just a single instance. There were no other events beyond the one throttle; I contacted my brother to test CPU- and GPU-heavy games and asked for an update.

F
Fixedys
Junior Member
3
07-05-2021, 09:33 PM
#10
F
Fixedys
07-05-2021, 09:33 PM #10

Pages (2): 1 2 Next