F5F Stay Refreshed Hardware Desktop The information about your PC's bios isn't displaying.

The information about your PC's bios isn't displaying.

The information about your PC's bios isn't displaying.

T
timo_1892
Senior Member
715
10-05-2022, 07:24 AM
#1
I just set up my initial gaming setup and everything worked smoothly. I managed to install Windows but later it failed, so I reset the BIOS by taking out the CMOS battery and putting it back in after ten minutes. Now, whenever I turn on the PC, nothing appears on the screen and entering the BIOS is not possible. On the surface, the machine seems to be operating normally. Here are the details of my build: Asus TUF Gaming B550-Plus Wi-Fi II - RTX 3060 Ti - Ryzen 5 5600 - 1TB WD Blue SSD - 16GB 3200MHz RAM - 650W Corsair PSU - Montech King 95 Pro
T
timo_1892
10-05-2022, 07:24 AM #1

I just set up my initial gaming setup and everything worked smoothly. I managed to install Windows but later it failed, so I reset the BIOS by taking out the CMOS battery and putting it back in after ten minutes. Now, whenever I turn on the PC, nothing appears on the screen and entering the BIOS is not possible. On the surface, the machine seems to be operating normally. Here are the details of my build: Asus TUF Gaming B550-Plus Wi-Fi II - RTX 3060 Ti - Ryzen 5 5600 - 1TB WD Blue SSD - 16GB 3200MHz RAM - 650W Corsair PSU - Montech King 95 Pro

W
WhatsThePack
Member
215
10-05-2022, 09:24 AM
#2
Did you see the BIOS before the CMOS reset? The Mobo has indicator LEDs directly above the 24-pin power connector for RAM, CPU, VGA, and BOOT. Do any of them illuminate? These are used for error codes.
W
WhatsThePack
10-05-2022, 09:24 AM #2

Did you see the BIOS before the CMOS reset? The Mobo has indicator LEDs directly above the 24-pin power connector for RAM, CPU, VGA, and BOOT. Do any of them illuminate? These are used for error codes.

L
Lea_Vanina
Junior Member
5
10-05-2022, 02:26 PM
#3
It seems the Windows setup might have caused issues in UEFI, try posting without an SSD and see if it works on another machine. Also, consider updating the BIOS using the Flashback option.
L
Lea_Vanina
10-05-2022, 02:26 PM #3

It seems the Windows setup might have caused issues in UEFI, try posting without an SSD and see if it works on another machine. Also, consider updating the BIOS using the Flashback option.

E
empireearth2
Member
53
10-06-2022, 09:08 PM
#4
Secure boot activated? I attempted to press the shift key and reboot to enter advanced troubleshooting mode and reach the UEFI settings.
E
empireearth2
10-06-2022, 09:08 PM #4

Secure boot activated? I attempted to press the shift key and reboot to enter advanced troubleshooting mode and reach the UEFI settings.

P
pocio77
Posting Freak
783
10-07-2022, 01:57 PM
#5
Only the boot is illuminating
P
pocio77
10-07-2022, 01:57 PM #5

Only the boot is illuminating

M
mjt2789
Senior Member
483
10-25-2022, 10:13 PM
#6
Boot light activates if the system couldn’t load the operating system or there’s an issue with the bootloader. The disk may also be faulty. I attempted to remove the disk and restart the computer.
M
mjt2789
10-25-2022, 10:13 PM #6

Boot light activates if the system couldn’t load the operating system or there’s an issue with the bootloader. The disk may also be faulty. I attempted to remove the disk and restart the computer.