F5F Stay Refreshed Hardware Desktop The GPU isn't fitting into the PCIe connector.

The GPU isn't fitting into the PCIe connector.

The GPU isn't fitting into the PCIe connector.

Pages (3): 1 2 3 Next
H
HetYoshiTeam
Member
164
11-08-2021, 01:49 AM
#1
Motherboard model: ASRock Z590 Pro4 GPU: XFX Radeon RX 6600 Case: Antec P7 Neo I can position the GPU correctly, but it doesn’t fit properly no matter how much force I apply. I’m puzzled as to why. It slides in the lower slot easily, yet I need it in the upper one. A picture of the motherboard is provided.
H
HetYoshiTeam
11-08-2021, 01:49 AM #1

Motherboard model: ASRock Z590 Pro4 GPU: XFX Radeon RX 6600 Case: Antec P7 Neo I can position the GPU correctly, but it doesn’t fit properly no matter how much force I apply. I’m puzzled as to why. It slides in the lower slot easily, yet I need it in the upper one. A picture of the motherboard is provided.

J
juri1990
Senior Member
441
11-08-2021, 10:16 AM
#2
Yes, the clip on the right side of the slot is completely open.
J
juri1990
11-08-2021, 10:16 AM #2

Yes, the clip on the right side of the slot is completely open.

F
Faz3GamerHD
Junior Member
30
11-08-2021, 11:17 AM
#3
Yep.
F
Faz3GamerHD
11-08-2021, 11:17 AM #3

Yep.

Y
YoloGeek22
Member
152
11-08-2021, 06:36 PM
#4
No, there are no standoffs behind your motherboard.
Y
YoloGeek22
11-08-2021, 06:36 PM #4

No, there are no standoffs behind your motherboard.

I
ItzUtopia_PvP
Member
149
11-10-2021, 04:24 PM
#5
Yes, there are. I almost overlooked a few areas, but I really think it’s not connected.
I
ItzUtopia_PvP
11-10-2021, 04:24 PM #5

Yes, there are. I almost overlooked a few areas, but I really think it’s not connected.

D
DrinkMoreMilk
Junior Member
43
11-11-2021, 11:43 AM
#6
Yes, you can manually lift the locking tab up.
D
DrinkMoreMilk
11-11-2021, 11:43 AM #6

Yes, you can manually lift the locking tab up.

W
wgwd
Junior Member
11
11-13-2021, 05:33 AM
#7
Ensure the PCIe slot panels fit snugly within the case. Often the issue is a slight misalignment, causing the card to fail to install.
W
wgwd
11-13-2021, 05:33 AM #7

Ensure the PCIe slot panels fit snugly within the case. Often the issue is a slight misalignment, causing the card to fail to install.

G
gavinom123
Member
191
11-17-2021, 07:08 PM
#8
Remove the board and test it. This will help determine whether the problem lies with interference or with the slot/board itself.
G
gavinom123
11-17-2021, 07:08 PM #8

Remove the board and test it. This will help determine whether the problem lies with interference or with the slot/board itself.

E
EnderSponge_
Member
225
11-18-2021, 11:37 PM
#9
The IO panels needed adjustment due to minor bending.
E
EnderSponge_
11-18-2021, 11:37 PM #9

The IO panels needed adjustment due to minor bending.

O
Olewww123
Senior Member
255
11-25-2021, 11:44 PM
#10
It seems the SATA ports are interfering with the setup. Initially I thought it was resolved, but others confirmed it still occurs. I can observe the GPU interacting with the SATA connections as shown in the video. This suggests incompatibility between the board and GPU. Anyone have insights on selecting a compatible GPU and motherboard combination? VID_20221127_195921710.mp4 Edited November 28, 2022 by Bread Song
O
Olewww123
11-25-2021, 11:44 PM #10

It seems the SATA ports are interfering with the setup. Initially I thought it was resolved, but others confirmed it still occurs. I can observe the GPU interacting with the SATA connections as shown in the video. This suggests incompatibility between the board and GPU. Anyone have insights on selecting a compatible GPU and motherboard combination? VID_20221127_195921710.mp4 Edited November 28, 2022 by Bread Song

Pages (3): 1 2 3 Next