F5F Stay Refreshed Hardware Desktop The GPU doesn't fit in the Pop Air case.

The GPU doesn't fit in the Pop Air case.

The GPU doesn't fit in the Pop Air case.

L
lotte_a_
Junior Member
4
05-25-2022, 07:46 AM
#1
Hello, I'm facing an issue where the GPU doesn't fit in the Pop Air case with your ASUS Prime B660 Plus D4 motherboard. It looks like the GPU can only be partially installed, staying on one side but not fully. The angle of placement is making it difficult. I'm unsure how to proceed since it won't fit completely and I can't get any output. Could you offer some advice? Also, a photo was attached, but if you examine it closely on the right side, you'll notice the GPU isn't seated properly.
L
lotte_a_
05-25-2022, 07:46 AM #1

Hello, I'm facing an issue where the GPU doesn't fit in the Pop Air case with your ASUS Prime B660 Plus D4 motherboard. It looks like the GPU can only be partially installed, staying on one side but not fully. The angle of placement is making it difficult. I'm unsure how to proceed since it won't fit completely and I can't get any output. Could you offer some advice? Also, a photo was attached, but if you examine it closely on the right side, you'll notice the GPU isn't seated properly.

C
crazykid67034
Junior Member
11
05-25-2022, 09:11 AM
#2
If the left side is the issue, near the video ports, it might be a case of interference with the case or a misalignment of the motherboard.
C
crazykid67034
05-25-2022, 09:11 AM #2

If the left side is the issue, near the video ports, it might be a case of interference with the case or a misalignment of the motherboard.

K
kingjuul
Junior Member
16
06-07-2022, 02:35 PM
#3
You should adjust the back of the enclosure where the PCIe ports are positioned slightly while installing the GPU. Occasionally the edge of the GPU cover can block the back panel.
K
kingjuul
06-07-2022, 02:35 PM #3

You should adjust the back of the enclosure where the PCIe ports are positioned slightly while installing the GPU. Occasionally the edge of the GPU cover can block the back panel.