The G4560 3.5 GHz Dual Core CPU is not overclockable.
The G4560 3.5 GHz Dual Core CPU is not overclockable.
TJ Hooker :
ThomasKK shared some insights about overclocking a locked CPU. It’s challenging and risky, and there are limitations depending on the CPU model and BIOS version. For Skylake CPUs with specific Z170 motherboards and updated BIOS, certain features like integrated graphics and temperature monitoring are disabled. This can make it hard to determine if the CPU is stable or not, increasing the risk of overheating.
remember that pushing a CPU beyond its limits only forces it to work harder to reach 110% maximum on most systems
if it feels sluggish at 100%, increasing by 10% can make it seem almost as slow as before
the advantages of overclocking aren’t always significant, with some users reaching up to 125% but that’s uncommon
it demands effort, a reliable cooling system, and a quality power supply
temperature rises, power usage climbs, the mainboard’s lifespan may shorten, and fan noise often increases as they spin faster to dissipate heat from the overclocked components
it’s easier to stick with what you have when you’re not satisfied
If possible, could you assist in setting up a MBO for this CPU and graphics card? I need features like additional USB ports, possibly USB 3.0, while staying under £310. It should also support 2 or 4 DDR4 slots. Let me know if it can be done without exceeding that budget.
Any B250 (or H270, Z270) motherboard can support that CPU and GPU equally well. They all come with 2 or 4 RAM slots and USB 3.0. You're not sure what other ports or features you need, but honestly, the cheapest B250 motherboard should work just fine.
you might want to list specific requirements such as 10 usb ports or 4 ram slots. however, it’s not possible to combine a cheap pentium with an expensive i7. the overall experience depends on the price and performance of your purchase. you should be satisfied with it, or upgrade by adding more ram and an ssd, removing unused programs, and enabling game mode on windows 10, or opt for a faster cpu that fits within your mainboard’s capabilities.
I don't really require 10 USB ports; I'd be fine with just 4 or 5. It would be great to have two 4 GB RAM sticks in my motherboard while keeping the GPU slot directly into one of the PCIe slots (I believe that's what they mean). This way, power could come straight from the motherboard instead of using external cables. Anyone have suggestions?
any mainboard you own will support a gpu without needing extra power cables
the 10 usb ports mentioned are just a suggestion; you didn’t specify what i meant by that, so i wasn’t suggesting you get 10 usb ports. i was simply clarifying your request for essentials
current mainboards usually include multiple ram slots to accommodate two modules, and no desktop model from today comes with fewer than what i previously described—except for niche models like the nuc type, which can’t support a gpu
what parts have you purchased or are planned to buy?
i assume you’ve bought a pentium processor and a gpu; could you list the other components in more detail?
HybridWolf :
using a GPU Card slot directly into one of the PCIe slots on the motherboard and drawing power from the motherboard itself is an option. This approach works regardless of which PCIe slot you choose, since the card doesn't have its own power connectors. It depends on the specific card model. If you're planning to install 2x4 GB RAM, it's a good idea to opt for a motherboard with four RAM slots so you can upgrade later to 16 GB if needed. Some suitable options are:
https://uk.pcpartpicker.com/product/VM2r...b250m-ds3h
https://uk.pcpartpicker.com/product/qjs8...0m-pro-vdh
https://uk.pcpartpicker.com/list/4v9vcc
I'm planning to buy all of these parts and combine them with the PC i have running right now.
HDD : SAMSUNG HD161GJ 160GB
OS : One question, i have a cd that when run, will allow me to install windows 8, do i have to boot off that cd drive or just stick it in my cd reader slot and turn the pc on, then follow installation guide?
Wifi : I have a wifi-stick that connects through USB.
Keyboard & Mouse : Sandberg, connects through usb slot ( No cables, wireless )
Case : I don't know what it is, but i may have to get a newer one that supports all the physical dimensions, but i think mine should be fine, it's fairly large i guess.
Thats all the stuff i will need to make a new computer run, right? ( Except wifi and kb&mouse, just to make the pc run is a start )