The dramatic lighting remains active.
The dramatic lighting remains active.
Purchased a new RAM for my B550m mortar Wi-Fi card, it booted into BIOS but the DRAM light stays on. I turned on XMP and it failed to start. Had to reset the CMOS and restart again—confirmed both RAMs are recognized (shows 2 of 4 slots, 16GB). How can I resolve the DRAM light issue? It’s currently running at 2400MHz even though it was purchased for 3200MHz. Also, the part number listed in the QVL (HX432C16FB3K2/16) still shows the DRAM light on. I haven’t updated BIOS yet; it’s running from 08/31/2020.
You're considering proceeding despite missing memory compatibility fixes in the changelogs. It's wise to weigh the risks and benefits before deciding.